Mounting a Kindling Cracker ?

  • Some of the links on this forum allow SMF, at no cost to you, to earn a small commission when you click through and make a purchase. Let me know if you have any questions about this.
SMF is reader-supported. When you buy through links on our site, we may earn an affiliate commission.

Smokin Okie

Master of the Pit
Original poster
★ Lifetime Premier ★
Jun 27, 2018
1,639
1,434
Oklahoma City
I've had mine on a stump for the past 6 years. But the stump has rotted. I can go get another one at the wood lot. But is there something better ?
 
  • Like
Reactions: JLeonard
I had built a stand out of 2x4's and plywood I had and bolted it to it.
Drilled a hole in the top so the hammer could fit in it.
Had a vinyl cover over it to keep weather off.
The plywood would had disintegrated quickly in sun/rain otherwise.
 
The biggest problem with a stump, is cutting it square with a chain saw. And if its not level, the pounding wears on the lag bolts holding it to the stump.

There's gotta be some kind of jig that can help square off the stump ?
 
SmokingMeatForums.com is reader supported and as an Amazon Associate, we may earn commissions from qualifying purchases.
Clicky