• Some of the links on this forum allow SMF, at no cost to you, to earn a small commission when you click through and make a purchase. Let me know if you have any questions about this.
SMF is reader-supported. When you buy through links on our site, we may earn an affiliate commission.

Abishai

Newbie
Original poster
Jul 14, 2019
3
0
Hello,

I am planning on a building a cabinet smoker out wood - North American Pine.

Something like the images uploaded here (which I may have got from SMF).

Approx dimensions:
Height - 6 ft
Width - 4 ft
Depth - 2 ft

Heres my question, I need advice and suggestions with regards to the smoke box/smoking chamber.

What would be the correct size or dimensions of the smoking chamber/smoke box for smoker of the size I mentioned.

I'd really appreciate the help as this build is long pending.

Also any advice with regards to the build will be most appreciated.
 

Attachments

  • Screenshot_20190714-192407.jpg
    Screenshot_20190714-192407.jpg
    65.3 KB · Views: 39
  • Screenshot_20190120-125037.jpg
    Screenshot_20190120-125037.jpg
    89.7 KB · Views: 39
  • Screenshot_20190120-125020.jpg
    Screenshot_20190120-125020.jpg
    75.4 KB · Views: 39
  • Screenshot_20190120-124958.jpg
    Screenshot_20190120-124958.jpg
    99.4 KB · Views: 41
The images you have posted are using a chargriller firebox that is widely available at big box stores. So if that's what you want to use for yours, that should take a bit of work out of it.

Looking at your post, now I want to build one! :-)

I'm based in Mumbai, India. Getting ready parts is very difficult, so will have to get it fabricated.

Planning on building a smoker to smoke some Goa Chorisos.
 

Attachments

  • IMG_20190621_185611.jpg
    IMG_20190621_185611.jpg
    302.5 KB · Views: 35
SmokingMeatForums.com is reader supported and as an Amazon Associate, we may earn commissions from qualifying purchases.

Hot Threads

Clicky