Wooden Smoker Build - Choriso.

[Abishai]

Hello,

I am planning on a building a cabinet smoker out wood - North American Pine.

Something like the images uploaded here (which I may have got from SMF).

Approx dimensions:
Height - 6 ft
Width - 4 ft
Depth - 2 ft

Heres my question, I need advice and suggestions with regards to the smoke box/smoking chamber.

What would be the correct size or dimensions of the smoking chamber/smoke box for smoker of the size I mentioned.

I'd really appreciate the help as this build is long pending.

Also any advice with regards to the build will be most appreciated.

 

[fivetricks]

The images you have posted are using a chargriller firebox that is widely available at big box stores. So if that's what you want to use for yours, that should take a bit of work out of it.

Looking at your post, now I want to build one! :-)

However, this calculator should serve. It's meant for RF tanks but the calcs should all be the same for a standard box

https://www.smokingmeatforums.com/t...eady-to-use-rev5-6-19-15.172425/#post_1264161

 

[Abishai]

The images you have posted are using a chargriller firebox that is widely available at big box stores. So if that's what you want to use for yours, that should take a bit of work out of it.

Looking at your post, now I want to build one! :-)

I'm based in Mumbai, India. Getting ready parts is very difficult, so will have to get it fabricated.

Planning on building a smoker to smoke some Goa Chorisos.

 

[fivetricks]

Those look just phenomenal.

Go ahead and check out that calculator I posted then. That should get you where you need to be.