Pic of what? I posted them all.
-
Some of the links on this forum allow SMF, at no cost to you, to earn a small commission when you click through and make a purchase. Let me know if you have any questions about this.
Alelover's Smokehouse Build from Mostly Free Stuff (Maiden Voyage)
- Thread starter alelover
- Start date
SmokingMeatForums.com is reader supported and as an Amazon Associate, we may earn commissions from qualifying purchases.
smokeywoody
Newbie
Finished product!!!
You know I will.
twoalpha
Smoking Fanatic
Scott
Just saw this, I'm a little late to the build project
You are making great progress, Looking Good
Larry
Just saw this, I'm a little late to the build project
You are making great progress, Looking Good
Larry
Worked on the doors a little yesterday.
Backing board for the thermometer mounting.
Fitting for the thermo is held in with a snap ring on each side.
A little bit of 3M Fireblock to keep it from spinning.
Getting the hinges lined up.
Backing board for the thermometer mounting.
Fitting for the thermo is held in with a snap ring on each side.
A little bit of 3M Fireblock to keep it from spinning.
Getting the hinges lined up.
Last edited:
Got the doors on today. Laid it down with help. This things heavier than I thought.
Then stood it back up with 2 helpers.
They work quite nicely. A few more things to do yet. I just may have it done by Thanksgiving.
Then stood it back up with 2 helpers.
They work quite nicely. A few more things to do yet. I just may have it done by Thanksgiving.
Looking real good Scott !!
I figured it would be pretty doggone heavy!!
Good it has wheels!!
And Larry said, "Git--er--Duuuuunnnnn!!"
Bear
I figured it would be pretty doggone heavy!!
Good it has wheels!!
And Larry said, "Git--er--Duuuuunnnnn!!"
Bear
billdawg
Smoking Fanatic
Lookin' really good! I will be interested to see the finished product.
smokeywoody
Newbie
Heat source came yesterday.
Making some cleats to hold the doors closed. Made with Hard Rock Maple from my maple stash.
Made some stainless bushings for the lag screws to ride on.
I believe this should hold the door closed sufficiently.
Making some cleats to hold the doors closed. Made with Hard Rock Maple from my maple stash.
Made some stainless bushings for the lag screws to ride on.
I believe this should hold the door closed sufficiently.
Last edited:
I smell thanksgiving dinner! What is and where did your thermometer come from?
They were thermometers we got a long time ago when we had the homebrew store. I think they came from military surplus. I am using 2 of them in my brew system now.
smokeywoody
Newbie
Can I use insulation foam board unde 1/4 inch plywood to insulate my smoker???
Just stumbled upon this thread Scott.. Looks like I'm gonna have to fill that smoker up for ya.......
Nice job as always
smokeywoody
Newbie
Thanks Joe. You know I will let you fill it.
Depends what kind of foam board. Check the melting point of what you plan to use.
Got the cleats mounted yesterday.
Doors close quite nicely.
Just need some stove rope to seal the doors and she'll be ready for some smoke.
Told the wife I needed a heavy duty handle. She found this.
Doors close quite nicely.
Just need some stove rope to seal the doors and she'll be ready for some smoke.
Told the wife I needed a heavy duty handle. She found this.
Awesome Handle, Scott !!
I'm ready now---After the rope seal.
Bear
I'm ready now---After the rope seal.
Bear
I need to find some black screws. The silver ones won't do. Going to run a batch of Todd's pellets through it this weekend ans season it up a little. Still got to do the propane setup and some other stuff yet. My daughter Tabitha wants to paint it.
SmokingMeatForums.com is reader supported and as an Amazon Associate, we may earn commissions from qualifying purchases.
Similar threads
SmokingMeatForums.com is reader supported and as an Amazon Associate, we may earn commissions from qualifying purchases.
SmokingMeatForums.com is a community of barbecue and outdoor cooking enthusiasts dedicated to smoking meat.
© 2004-2026 SmokingMeatForums.com
