SV - Where to start?

  • Some of the links on this forum allow SMF, at no cost to you, to earn a small commission when you click through and make a purchase. Let me know if you have any questions about this.
SmokingMeatForums.com is reader supported and as an Amazon Associate, we may earn commissions from qualifying purchases.

illini40

Smoking Fanatic
Original poster
Feb 12, 2017
702
309
Good morning

I was fortunate enough to receive a sous vide cooker (Joule) for Christmas. I’ve alway me wanted one and been very intrigued, but I do not know much about SV.

Where would you recommend I even start? Any specific resources?

Also, a few specific questions:
- Are any ziploc or FoodSaver brand vac seal bags ok to use?
- Do you need a wireless leave in thermometer (Meater)?

Thank you!
 
I could have been wrong but the one time I have used my SV, I used a ziplock bag without issue. Sure someone will come and say I was wrong but not the first time.

With the SV, you set the temp on the device to yiur desired finished temp and time. Whatever the temp you set, the item you are cooking will never get over that temp, so dont really see a need for a leave in therm.

I have a huge aluminum pot I used with my Inkbird, but see a lot of folks use a large rubbermade type tub to hold the water
 
Chuck roast my favorite thing. I use Bears.

 
I use it most for chicken and steak. My wife buys big flats with 10-12 chicken breasts. So I dust them all with some creole seasoning and then bag 2 each plus a pad of butter in vacuum bags. When we want chicken they go straight from the freezer into the sous vide bath at 150f for 4 hours then finish how ever you like. Steaks I do the same thing if they are frozen only at 132F for 5 - 8 hours then sear with flame thrower. For fresh steaks or chicken I just reduce the time by 1 - 2 hours. They also work fantastic to precook beer brats.(a freezer bag with a little beer and 3 or 4 brats. Cook for 2-4 hours at 155 - 160f then I sear with the flame thrower. I have done ribs and they were ok. But ribs and pork steaks I think I prefer just smoked and wrapped.(321 style, tho mines more like 2.5, 3, 45min) Just did my prime rib its posted above.
 
  • Like
Reactions: jcam222
Good morning

I was fortunate enough to receive a sous vide cooker (Joule) for Christmas. I’ve alway me wanted one and been very intrigued, but I do not know much about SV.

Where would you recommend I even start? Any specific resources?

Also, a few specific questions:
- Are any ziploc or FoodSaver brand vac seal bags ok to use?
- Do you need a wireless leave in thermometer (Meater)?

Thank you!

Anything from Doug Baldwin is Great.
On YouTube, look for anything from "Sous Vide Everything".
Here some Step by Steps of SV that I did:
51st Wedding Anniversary SV Chucky
Ribeye Testing (Step #2)
Chicken Salad for Mrs Bear
Boneless & Skinless Chicken Thighs
Boneless & Skinless Chicken Thighs #2
Chucky 50 hours. (By Far My Best Tender Sliced Chucky)
Pulled Beef Chuck Roast (Perfect) *
Beef Dinos (SV--48 hours)
Eye Round in SV Best of All Eye Rounds (11-21-17) *
Beef Eye Round (Finally) (9-18-18) *
Top Round (First Tender Test)
Pork Spare Ribs (SV & Weber "Q")
Country Style Ribs (Beef)
Country Style Ribs (SV & Grill Best Ever) (Pork)
Country Style Ribs (SV & Grill) Tied for "Best Ever" (Pork)
Pork CSRs (SV to Grill)
Pork Steaks (SV to Grill)
2" Thick Boneless Pork Chops
Single Cut Beef Ribs
Scallops & Fried Tater Slices
Scallops & Oil-Free Fries
Reheating Prime Rib Slices ( 3 different searing tests)
Reheating Fillet Mignon
Salmon & Catfish (Sous Vide)
Venison Backstrap (Sous Vide)

Bear
 
  • Like
Reactions: jcam222
Something we love and I need to make this week is egg bites. Thee things are awesome. Creamy texture like cheesecake but savory. They last for weeks and make great quick grabs for breakfast. You can play around with lots of flavor variations to them. Here is a link to the basics and a pic of one I did. https://recipes.anovaculinary.com/recipe/sous-vide-egg-bites-bacon-gruyere
D13EA6D7-F7CD-419C-AD4C-D48F56545136.jpeg
 
I think you have many ideas and directions above - enjoy!
 
You will love that little unit.
Our favorite is boneless skinless chicken breasts cooked 2 to a bag @ 134, for 3 hours. I put a couple of patties of butter, some lemon slices & some Montreal chicken seasoning. Vac pack it & let her rip. I have 2 circulators, so I use the other one for corn on the cob. S&P, and butter, 183 for 1 hour. You can experiment with all kinds of different stuff. Another favorite is pastrami, either cure a brisket or buy a store bought corned beef, if store bought, be sure to soak it in fresh water for a couple of hours changing the water a couple of times. Then smoke it to 150 IT, with your pastrami spices on it, we just like coriander & pepper. Then bag it up & SV it for 24 hours at 150 degrees. I don’t think you will be disappointed . Have fun with your new toy!
Al
 
Thank you everyone for the quick responses! Rally exited to try it out.

I could have been wrong but the one time I have used my SV, I used a ziplock bag without issue. Sure someone will come and say I was wrong but not the first time.

With the SV, you set the temp on the device to yiur desired finished temp and time. Whatever the temp you set, the item you are cooking will never get over that temp, so dont really see a need for a leave in therm.

I have a huge aluminum pot I used with my Inkbird, but see a lot of folks use a large rubbermade type tub to hold the water

I understand that the SV maintains the temperature and will not go over (and over cook). But, maybe this is a dumb question...do you ever need to be concerned with making sure the product is done (internal temp)?

Chuck roast my favorite thing. I use Bears.


Thank you! I have a Chuck roast in the freezer so may need to check


Thank you. Will check this out.

I use it most for chicken and steak. My wife buys big flats with 10-12 chicken breasts. So I dust them all with some creole seasoning and then bag 2 each plus a pad of butter in vacuum bags. When we want chicken they go straight from the freezer into the sous vide bath at 150f for 4 hours then finish how ever you like. Steaks I do the same thing if they are frozen only at 132F for 5 - 8 hours then sear with flame thrower. For fresh steaks or chicken I just reduce the time by 1 - 2 hours. They also work fantastic to precook beer brats.(a freezer bag with a little beer and 3 or 4 brats. Cook for 2-4 hours at 155 - 160f then I sear with the flame thrower. I have done ribs and they were ok. But ribs and pork steaks I think I prefer just smoked and wrapped.(321 style, tho mines more like 2.5, 3, 45min) Just did my prime rib its posted above.

Very helpful. So you can put frozen meat directly in? No thawing needed?


Wow...thank you, Bear! I have some reading to do.

Something we love and I need to make this week is egg bites. Thee things are awesome. Creamy texture like cheesecake but savory. They last for weeks and make great quick grabs for breakfast. You can play around with lots of flavor variations to them. Here is a link to the basics and a pic of one I did. https://recipes.anovaculinary.com/recipe/sous-vide-egg-bites-bacon-gruyereView attachment 477067

Thank you. Egg bites are of great interest to my wife and sister in law. I need to try these quick. Any pointers? I’ve seen different approaches of cottage cheese, cream cheese...any suggestions?

You will love that little unit.
Our favorite is boneless skinless chicken breasts cooked 2 to a bag @ 134, for 3 hours. I put a couple of patties of butter, some lemon slices & some Montreal chicken seasoning. Vac pack it & let her rip. I have 2 circulators, so I use the other one for corn on the cob. S&P, and butter, 183 for 1 hour. You can experiment with all kinds of different stuff. Another favorite is pastrami, either cure a brisket or buy a store bought corned beef, if store bought, be sure to soak it in fresh water for a couple of hours changing the water a couple of times. Then smoke it to 150 IT, with your pastrami spices on it, we just like coriander & pepper. Then bag it up & SV it for 24 hours at 150 degrees. I don’t think you will be disappointed . Have fun with your new toy!
Al

Thanks Al! When you vac seal meat (with some liquid), any pointers? My FoodSaver model has a liquid setting. Is that best?
 
Thanks Al! When you vac seal meat (with some liquid), any pointers? My FoodSaver model has a liquid setting. Is that best?
[/QUOTE]
If there is any liquid in the bag I usually put the bag in the freezer to get the liquid to set up, then vac it. My Vacmaster doesn’t have a liquid setting on it, so you may be able to bypass this step, with your machine.
Al
 
  • Like
Reactions: illini40
You shouldnt be concerned with it being done as long as yiu follow the minimum time and temp you set.

I understand following the time and temp guidance, but what about about different sizes/thickenesses and other variables from those guidelines?

I assume that I am just over thinking this. But, after spending time in the BBQ space, we learn to cook to doneness, not time/temps so it just seems odd.
 
I understand following the time and temp guidance, but what about about different sizes/thickenesses and other variables from those guidelines?

I assume that I am just over thinking this. But, after spending time in the BBQ space, we learn to cook to doneness, not time/temps so it just seems odd.


That's more important for things you want to get done in a relatively short time, like maybe a Steak that's already tender, and not thick like a roast.
However when you're doing a tough piece of meat, which is what the SV really shines at, it's not so important.
Example ---If you're SVing a Chuck Roast @ 131° for 48 Hours, it really doesn't matter much if you remove it at 46 hours or 50 hours. And it doesn't matter if it's 2" thick or 3" thick.

Bear
 
  • Like
Reactions: illini40
Careful with liquids ... will ruin your vacuum pump if sucked into it.
If only slightly so, can use the paper towel trick (folded up in the bag between the meat and sealer).
Or I watch carefully and hit the seal button if I see liquid being wicked up.
If destined to be frozen anyway, I go ahead and freeze first and then Vac/seal. I do that a lot and then cook from frozen.
 
Steaks I do the same thing if they are frozen only at 132F for 5 - 8 hours then sear with flame thrower.
Wow, that sounds very long ... we did 1-1/2 inch NY Strips Christmas Eve, frozen, at 131 for 2 hours, then quick sear in a cast iron skillet ... perfect medium rare.
 
That's more important for things you want to get done in a relatively short time, like maybe a Steak that's already tender, and not thick like a roast.
However when you're doing a tough piece of meat, which is what the SV really shines at, it's not so important.
Example ---If you're SVing a Chuck Roast @ 131° for 48 Hours, it really doesn't matter much if you remove it at 46 hours or 50 hours. And it doesn't matter if it's 2" thick or 3" thick.

Bear
Exactly. Although you have a pretty wide window from minimum (to be done/safe) to max (before texture altered) times even in thinner cuts. In above post re NY Strips for example, Anova publishes range of 1-4 hours ... we did 2 and it was perfect. I’m sure it could have pulled a bit sooner, or stayed longer, and been fine.
 
I do all my fresh ribeyes and fillets at 4-5 hours. But I like my steaks very tender. I wouldnt go over 7 or 8 tho or the steak might get too mushy. But I usually am doing thick cut steaks. Again if frozen 5-6 hours is no biggy.
 
SmokingMeatForums.com is reader supported and as an Amazon Associate, we may earn commissions from qualifying purchases.

Latest posts

Hot Threads

Clicky