Members Mark griddle?

[CFLJOHN512]

Wasn’t sure where to put this post. (We need a griddle section).
Girlfriend wants to get a griddle and is trying to compare the Blackstone to the Members Mark (Sam’s). They are about half the price. Specs look similar. Does anyone have experience with the Sam’s brand, or both? Any help would be greatly appreciated.
Link below.

Member's Mark 4-Burner Outdoor Gas Griddle - Sam's Club

Buy Member's Mark 4-Burner Outdoor Gas Griddle : Gas Grills & Griddles at SamsClub.com

www.samsclub.com

 

[TNJAKE]

No experience with the one from sams but I love my Blackstone

 

[BrianGSDTexoma]

I have a friend that has one and loves it. I try to send him link to this and see if can give you more info.

 

[Steve H]

The only thing I see and wouldn't like. Is the location of the grease collection opening. Seems odd to have it at that location. The BS has it along the back wall where you have to guide the grease to. Seems like the one on this one would accidently collect the grease/oil when you don't want it to. And it is taking up space where you could put that extra burger.....

 

[BandCollector]

The only thing I see and wouldn't like. Is the location of the grease collection opening. Seems odd to have it at that location. The BS has it along the back wall where you have to guide the grease to. Seems like the one on this one would accidently collect the grease/oil when you don't want it to. And it is taking up space where you could put that extra burger.....

I would have to agree with Steve. . .But, on the other hand, once you become accustomed to its location it really wouldn't matter. The grease collection pan seems easily accessible.

Personally, for the price I would be able to overlook that minor feature.

John

 

[tag0401]

We need a griddle section

I will second that!!

Not familiar with the MM griddle but it looks like it would function the same!

 

[SmokinAl]

That looks like a fine griddle to me!
I really like the pullout grease tray!
And for that price how could you go wrong!
The only thing I would check is the cooking surface material.
It should be at least 1/4” rolled steel.
Al

 

[BrianGSDTexoma]

Sorry. Gave you bad info. He said took back and bought Blackstone. Was warped and did not like the drain

 

[Gateman]

Wasn’t sure where to put this post. (We need a griddle section).
Girlfriend wants to get a griddle and is trying to compare the Blackstone to the Members Mark (Sam’s). They are about half the price. Specs look similar. Does anyone have experience with the Sam’s brand, or both? Any help would be greatly appreciated.
Link below.

Member's Mark 4-Burner Outdoor Gas Griddle - Sam's Club

Buy Member's Mark 4-Burner Outdoor Gas Griddle : Gas Grills & Griddles at SamsClub.com

www.samsclub.com

No comparison,

Wasn’t sure where to put this post. (We need a griddle section).
Girlfriend wants to get a griddle and is trying to compare the Blackstone to the Members Mark (Sam’s). They are about half the price. Specs look similar. Does anyone have experience with the Sam’s brand, or both? Any help would be greatly appreciated.
Link below.

Member's Mark 4-Burner Outdoor Gas Griddle - Sam's Club

Buy Member's Mark 4-Burner Outdoor Gas Griddle : Gas Grills & Griddles at SamsClub.com

www.samsclub.com

Blackstone is the way to go, Sam’s not made as well and has grease drip in the center
the tops warp also and Blackstone has angle iron welded on the bottom side To prevent that

 

[Steve H]

Sorry. Gave you bad info. He said took back and bought Blackstone. Was warped and did not like the drain

That's too bad. Sounds like I'm not the only one that's not crazy about that drain!

 

[Hawging It]

Don’t have either one but I’ll bet you would be happy with 1/2 price Sam’s version.

 

[jcam222]

Biggest difference in the one I looked at vs my Blackstone is the thickness of the actual griddle. My Blackstone is far thicker metal.

 

[CFLJOHN512]

Biggest difference in the one I looked at vs my Blackstone is the thickness of the actual griddle. My Blackstone is far thicker metal.

Which is going to be a much more even cooking surface.

 

[Steve H]

Which is going to be a much more even cooking surface.

And holds the heat better.

 

[TNJAKE]

John the one I posted up top is only $74 more expensive than the Sam's model. I have a family of 6 and haven't run out of room yet. It is 2 knobs but 4 burners. Plus it has a lid.

 

[dazdnaz]

Just joined Sam's club because of your post. I have been researching for awhile, I always end up modifying things I buy so what the heck. Purchase made Monday.

From what I have seen so far I am going to do the following:
Weld angle iron on the bottom for support against warping I will also lay it flat (at a 90) around the edges to trap heat and prevent wind from cooling the surface or knocking the flame down (not to mention the heat warming the middle section blowing out of the front). So far it got hot enough to season the top 3/4 of the griddle not so much at or below the drain hole (which is a bit inconvenient).

Did some cheese steaks last night after the rally, sorry no pictures I was beat and in a hurry. It performed well, I'm sure there are better but there's not much to a griddle. With the few things I plan on doing I think it will perform as well as the others.

Fired up

Underside of a Blackstone (not my image, hope that's OK) similar to what I plan minus laying flat angle around the edges (this weekends project).

 

[WayneM]

I have the 5 burner Meber's Mark Griddle for about 2 weeks now. I have cooked several meals on it and I have had no problem except I wish the flow control could go a little lower on each burner..

As for the grease collection location I have watched my son on his BS with food slipping to the rear and having to catch it and pull it back to the cooking area. As for my front hole grease catching it functions the same way. If food slides toward it, I just pull it back. However, since most of my cooking is center to rear, the front hole is not a problem. I did lose one shrimp on a stir fry day, but it was my wife's piece.

 

[Inscrutable]

. I did lose one shrimp on a stir fry day, but it was my wife's piece.

 

[bill1]

L-brackets work better as stiffeners when used as L's, not V's. (I-beams work even better, but the size selection is limited.)

 

[WayneM]

Has anyone added or used an adjustable regulator, and if so was it low or high pressure, 10 or 20 psi?

If you have one, does it work well?