I am back with new project 20" smoker

  • Some of the links on this forum allow SMF, at no cost to you, to earn a small commission when you click through and make a purchase. Let me know if you have any questions about this.
SMF is reader-supported. When you buy through links on our site, we may earn an affiliate commission.

bigsal51

Smoke Blower
Original poster
Jul 6, 2008
132
10
Pipe is 20" by 49" and the box is 20"x20" Box is 5/16 and the main chamber is 1/4". The legs look short because i am going to add a angle straigt now. Then attaching a frame for a small trailer and axle.
 
icon_cool.gif


Congrats on the new smoker but bummer for us cause we don't get to see it. So go slap around photobucket and see if they will let us see your new smoker.
 
Looks like you have the important part done.

Should look pretty good sitting up on a trailer.

Good Luck and thanks for sharing.
 
SmokingMeatForums.com is reader supported and as an Amazon Associate, we may earn commissions from qualifying purchases.

Latest posts

Clicky