Freezer Conversion

Discussion in 'Fridge/Freezer Builds' started by fire393, Aug 17, 2011.

  1. fire393

    fire393 Fire Starter

    May need some suggestions on this build for those willing!

    [​IMG]

    Inside...

    [​IMG]

    All lined with steel except this 2"  liner around the door which I will remove and replace with steel....

    [​IMG]

    Plan is to use stove top burners (220) , with a PID type  setup.....I know the spray in foam is up for debate as far as removal, But i have no plans of exceeding 200 degrees,( use MES 40 for hot smokes)  and it will be totally sealed off with  steel and food grade high temp silicone, so hopefully no worry there.  Going to use the AMNPS for a smoke source.  Any input or suggestions are welcome....  thanks!
     
  2. fire393

    fire393 Fire Starter

    A few updated pics...

    [​IMG]

    [​IMG]

    [​IMG]

    now its time for the electrical parts to be installed...
     
  3. nepas

    nepas Smoking Guru Staff Member Moderator Group Lead OTBS Member SMF Premier Member

    Yeah buddy thats freakin nice. Good job.

    [​IMG]
     
  4. bearcarver

    bearcarver Smoking Guru OTBS Member

    That is gonna be a Helluva Smoker---I can see that already!!!

    Bear
     
  5. fire393

    fire393 Fire Starter

    Electrical is being installed!  Getting Closer!!

    [​IMG]

    Smoke Stack is in......

    [​IMG]
     
  6. fire393

    fire393 Fire Starter

    Seasoning time!!

    [​IMG]

    AMNPS Doing its job!!

    [​IMG]
     
  7. mneeley490

    mneeley490 Master of the Pit OTBS Member

    It looks like you are still using the original plastic/rubber doorseal gasket. How is that working out for you?
     
  8. michael ark

    michael ark Master of the Pit

    If it was a freezer .The door gasket is pretty tough cause a lot of units have a heater around the door to keep it from freezing shut.
     
  9. fire393

    fire393 Fire Starter

    works well so far, temps will be under 200 at all times though, if it doesnt hold up, its easy to switch out.
     
  10. africanmeat

    africanmeat Master of the Pit OTBS Member

    Nice job well done .[​IMG]
     
  11. smokinal

    smokinal Smoking Guru Staff Member Moderator OTBS Member ★ Lifetime Premier ★

    AWESOME!!!
     
  12. jpenny2525

    jpenny2525 Fire Starter

    Looks AWESOME! Since temp will not be over 200 I was wondering what will be the main smoking use for this unit?
     
  13. Bad AZZ!
     
  14. roller

    roller Smoking Guru SMF Premier Member

    Now that is about the nicest one I have seen yet !!!!!
     
  15. fire393

    fire393 Fire Starter

    Mainly for sausage and snack sticks...... jerkey on occasion
     
  16. jpenny2525

    jpenny2525 Fire Starter

    COOL.

    JP
     
  17. That looks sweet! nice looking smoker!
     
  18. fire393

    fire393 Fire Starter

    Test run today....snack sticks

    [​IMG]
     
  19. chef willie

    chef willie Master of the Pit OTBS Member

    awesome job....waiting for the pics of the finished sticks...
     
  20. bearcarver

    bearcarver Smoking Guru OTBS Member

    Nice Snack Sticks!!!

    Bear
     

Share This Page