• Some of the links on this forum allow SMF, at no cost to you, to earn a small commission when you click through and make a purchase. Let me know if you have any questions about this.

Compressor issues

SmokingMeatForums.com is reader supported and as an Amazon Associate, we may earn commissions from qualifying purchases.
Same as the pipe fitters add at your gas appliances
I guess your garage is heated?
No , no heat in the garage . I did residential HVAC for awhile ( before I worked as a mechanic , before Carpenters ) that drop at the furnace is mostly for rust chips / dirt so it doesnt reach the burners .
That would be a preventative add on for this for sure . Used to have an inline moisture trap and oiler coming out of the compressor , but took it off when we moved . Planned on mounting it on the wall , but never got to it . It's here somewhere .
Need to look into that , good thinking . I actually want to put ball valve shut off in the garage . The hard pipe is a nice way to set it up . Add on a reel , and it's perfect .
 
its about 10ft. If I hard line it then there will be a pipe with two hoses, if I use a 25' hose that is less connections.
The logic behind hard line is to prevent incidental damage cuz, ..it happens. Actually just as easy to plumb pipe versus hanging a rubber line.
Plus you can make more hookups if needed. I'm guessing 50" hung over head will reach every corner of your workspace?
Reason I asked the height was if you added more hose to the 50" in the reel the spring may not have enough strength to retract all the hose.
I did applications years ago of ceiling mounted reels on 20' ceiling. We added another 15' of hose for the drop. Cheaper reels failed from the added hose.
 
the reel manufacturer says the lead hose cant be replaced with a longer one. Seems strange and not right to me...might need to regroup.
 
the reel manufacturer says the lead hose cant be replaced with a longer one. Seems strange and not right to me...might need to regroup.
Looks like the lead hose comes not connected to the reel. Seems like a simple matter of buying/making one the length you wish. IMHO Probably just said that to keep them clear of any legal issues. When I requested a couple more shelves for my outdoor kitchen. They first replied that they couldn't because it was altering/modifying the structure! After a couple of chats. They realized how dumb that sounded. And sent me two for no charge.
 
Last edited:
Looks like the lead hose comes not connected to the reel. Seems like a simple matter of buying/making one the length you wish. IMHO Probably just said that to keep them clear of any legal issues. When I requested a couple more shelves for my outdoor kitchen. They first replied that they couldn't because it was altering the structure! After a couple of chats. They realized how dumb that sounded. And sent me two for no charge.
100% agree. on the HD questions section someone asked if it could be mounted on a 2x6 and what size lags to use and their response was it couldnt be mounted on a 2x6, which is a joke, it only weighs like 25lb
 
Mount the reel on a wall within distance of the compressor . Male connector on the lead hose .
Disconnect when not in use , plug it up when you want to use it .
Keep the compressor portable as suggested above .

My " hard piped " compressor is 4 hp 25 gallons . Still just connected with an air coupler , but plenty of volume to keep line pressure without running everytime you take air out of the line . I use 50 ' hose to reach cars in the driveway . I can air up the car / truck tires and it won't even kick on .
Makes me think about how the smaller one would react to a long lead hose and 50 ' of use hose .
 
I have this one coming today .
I bought it for $119.00 on a Prime day thing they sent me . Normal price is $199.00 .
If you look at the link , you can see the lead hose is replacable . I'm sure they all are , otherwise if the hose gets damaged it's junk .
I agree. I ordered the Vevor one. Should be here Saturday. I feel like the leads are all replaceable. Got the Rigid compressor yesterday and fired it up. Held pressure for the few hours I checked it. Havent been out to the garage to see the overnight test yet.
 
@chopsaw Just ran out to the garage. Compressor held perfectly at 150 PSI overnight. Its a keeper. the reel should be here Saturday. Mounting it on the ceiling and ordered a 25' lead for it. Should be a very nice upgrade for the garage. Ive been using a 25' coil hose for too long and I have come to hate it.
 
Mounting it on the ceiling
Be nice for sure . I've been in the fence for the last 20 years , lol . Not sure if I'm going on the wall or ceiling .
My 25 gallon in the basement has decided to run at 2 in the morning again . Atleast it's on a 24 hr cycle .
Think I'll go down and drain it so it refills now , and maybe it will run during the day until I get time to trace the leak . It normally holds around the clock , but it's been under pressure for a long time . There's only 3 couplers on it , and I just replaced one .
Ive been using a 25' coil hose for too long and I have come to hate it.
My hose in the garage is 50 ' . Not real cheap , but not the best either . Have to bring it inside in the winter or it's to stiff . Be curious to see what type of hose is on this real . The hose in the wood shop is a high grade automtive oil resistant rubber . High flex .

Next thing is I saw an extension cord on a reel . Now that would be handy in the garage .
 
Next thing is I saw an extension cord on a reel . Now that would be handy in the garage .
Man now I want one of those too. I have a hand reel, but a retractable one would be sweet!
 
I've had one in my garage for going on 30 years now. Wouldn't be without one.
Whats the specs ?
I saw Home Depot has one on the shelf , but it's 16/3 10 amp . Seems kind of use less .
 
Whats the specs ?
I saw Home Depot has one on the shelf , but it's 16/3 10 amp . Seems kind of use less .
Wow! They've gone up in price! I spent 75.00 back then. Same specs, same company. Mine has a metal case.

 
Last edited:
My old Craftsman two gallon compressor leaks to zero overnight. ive messed with it and cant locate the leak...about done with it. Ive had it for decades and its generally just been ok, but leaked its whole life with nothing attached.

I cant find a big selection of smaller compressors, so maybe its time for a 6 gallon of where the selection is much larger. All I use it for is bike and truck tires and blowing stuff.

Any recommendations or "stay away from" suggestions? I would rather not drop a ton of money into it. Found this one
I've got one from Harbor fright. that's about 9 years old. still plugs in and fills flawlessly. Don't know the exact size, or if it holds air overnight as I don't use it much anymore. with that being said, I recently purchased on of those 12/120v little ones from Amazon I use to top offs on the Mustang or when the TPMS signals on the F-150. it's an "Astroni" compact. from Amazon. works like a charm with digital readout. I don't know if it would hold up filling a flat Jeep tire, but it saves me dragging the tank compressor out for small jobs.
 
Read the specs on those electric reels. Many require full extension of the cord to use under load. It is a heat dissipation factor
 
Read the specs on those electric reels. Many require full extension of the cord to use under load. It is a heat dissipation factor
Correct. Unwound ratings. Some brands derate the amperage capacity for that reason.
With quality, heavy-duty reels. The 12 ga are rated for 20 amps at any length. Normal duty reels at 12 ga. are rated for 15 amps. Some will be clearly labeled to be used fully extended.
Length will also play a factor.
 
SmokingMeatForums.com is reader supported and as an Amazon Associate, we may earn commissions from qualifying purchases.
SmokingMeatForums.com is reader supported and as an Amazon Associate, we may earn commissions from qualifying purchases.

Latest posts

Back
Top
Clicky