Heavy Metal

  • Some of the links on this forum allow SMF, at no cost to you, to earn a small commission when you click through and make a purchase. Let me know if you have any questions about this.
SMF is reader-supported. When you buy through links on our site, we may earn an affiliate commission.

Moonshinedave

Newbie
Original poster
Mar 28, 2021
8
6
No, Not talking about Black Sabbath, Ozzy, nor Judas Priest, (although I do like all these bands). I am talking about adding a large piece of iron inside the offset smoker to help regulate the swings of temperatures. I use a Oklahoma Joe's side smoker, not the cheapest nor the best, last couple of times I have placed a 6" black iron tee (weights probably about 15-20lbs,) seems to help. I was just wondering if anyone else has an opinion on this? Sorry I am not on a lot and haven't check too far to see if this topic has already been covered. Please excuse me if it had. I have I couple more Ideas, but I'll wait to see how much hell I catch over this before I bring them up. Thanks in advance.
 
  • Like
Reactions: kruizer
Mass will always help to maintain chamber temps as they hold a temp once heated up. I have a water pan in my OK joe offset and when it runs out of water, the temps start to swing a bit. That added mass always helps temps.
 
  • Like
Reactions: Moonshinedave
Water is a great idea , I used water in the past, but for moisture, never considered the mass. What was I thinking?, or better yet, not thinking. Thanks for the reply.
 
SmokingMeatForums.com is reader supported and as an Amazon Associate, we may earn commissions from qualifying purchases.

Hot Threads

Clicky