First Breakfast Fattie/3rd AMPNS test

  • Some of the links on this forum allow SMF, at no cost to you, to earn a small commission when you click through and make a purchase. Let me know if you have any questions about this.
SmokingMeatForums.com is reader supported and as an Amazon Associate, we may earn commissions from qualifying purchases.

dj mishima

Smoking Fanatic
Original poster
Jun 8, 2011
381
106
Canton, MI
I took a 1lb tube of Bob Evan's hot and rolled it out into a 1 gallon ziploc and froze until needed.

I then made some mashed potato omelettes.  I took some yesterday's roasted garlic/roasted pepper buttermilk mashed potatoes and mixed it with some of the gravy from yesterday's stroganoff(http://www.smokingmeatforums.com/t/137320/easy-stroganoff-ampns-test) and some crumbled queso blanco.  I was going for a poutine flavor.  Then I heated it up a bit in the microwave and put that mixture into two omelettes.


It's been awhile since I made an omelette, so I wasn't surprised when I messed one up a bit.  That's okay, I'll hide it under the pretty one.

Then I fried up four strips of bacon.


I trimmed the omelettes into rectangles and sandwiched the bacon strips inside of the omelettes.


See?  No one would ever know!

At this point, I started to have a horrible flashback of the last fattie I attempted to roll:

http://www.smokingmeatforums.com/t/124357/fatty-disaster

That one really had me thinking of throwing in the towel for a while.  Anyways, I almost couldn't get this fattie rolled either.  It was just shy of being too much stuffing.  It had a good enough portion of sausage overlapping at the seam so I tightened it up in some plastic wrap.


I left it in the freezer for about 30 minutes while I prepped another dish and got the AMPNS started.  Now we're ready to go!


I was keeping an eye on the vent and had to crack it open to get the AMPNS going again :(

This was starting to get discouraging.  I had read so many good things about this product.  This constant monitoring and relighting is completely self defeating for the purpose which it was purchased for.  However, I finally got it right this time around!  By the time I was done with the smoker, the AMPNS was chugging along really well and had a lot more time left to burn.  I really wished I had some stuff laying around to cold/warm smoke.  Oh well, I just isolated the ember and let it burn off.  I am now confident that I can do long term "set & forget" smokes in the future.  But here is what it looked like at 2 hours in at 250F:


It was looking good, but I thought I would smoke for another hour.  Here it is at that point:


I was a little scared when I tried taking the fattie off with some tongs.  I forgot that the meat tends to sag into the grating.  After carefully loosening it up, I was able to get it off the rack intact:


Now I'm just waiting for it to cool down to room temp, then I'll put it into the refrigerator until tomorrow's breakfast.  I will update with a money shot then.  Thanks for looking!

EDIT:

Sliced while cold:



Reheated slice:

 
Last edited:
Looks great! WRT your AMNPS - what kind of venting did you give it? I have an MES and pull out the chip tube a few inches, and then go with full open vent - I haven't had mine go out. Even smoking in cold weather (say, 10* F) the smoker keeps temp just fine...
 
Looks great! WRT your AMNPS - what kind of venting did you give it? I have an MES and pull out the chip tube a few inches, and then go with full open vent - I haven't had mine go out. Even smoking in cold weather (say, 10* F) the smoker keeps temp just fine...
I had the vents open all the way.  I didn't think to mess with the chip loading tube.  Anyways, I finally got it working correctly on this test run.  There were several moments where I was watching the vent and wondering if it was out or if I was seeing the TBS of legend.  It was indeed the TBS as the smoke rushed out of the chamber when I opened it at the 2 and 3 hour marks.  It didn't show any signs of going out any time soon.  Half an hour or so after I was done with the MES, I had to go separate the ember from the rest of the pellets or it would have continued going for several hours.

I can't wait to try this thing out again.  I have been spying some whole briskets at Wallyworld.  They were going for $2.58 or so per pound and dated 3/13/13.  I might have to keep checking back to see if they turn into a Manager's special.
 
Cool - I'd def try pulling out the tube a bit - I pull it just to where the chip drawer (ie opening) starts and it has worked well. I also put that side of the MES away from the wind if it's a breezy day. Also - not sure how humid it is at your place but I keep my pellets in a cooler w/the lid smashed down - not sure if that may be an issue or not. Anyway - good luck and thanks for the great idea and pics of the breakfast fatty - I'm looking forward to making one!!
 
SmokingMeatForums.com is reader supported and as an Amazon Associate, we may earn commissions from qualifying purchases.

Hot Threads

Clicky