Finished my UDS. My Lid Modification Story

Discussion in 'UDS Builds' started by thunderdome, Jan 12, 2010.

  1. thunderdome

    thunderdome Master of the Pit

    Here is where it began. Closed Zep drum. Torched out the top, and welded the lip of a disc blade to the outside....I thought it was going to work [​IMG]

    Fast forward to this past friday. We worked on this lid more, filling in the gaps, adding smoke stack, and a strap across the top which was also the handle. This thing was U.G.L.Y. and it DID NOT SEAL. Too much heat, thin metal on thick metal just warped it.

    So after plenty of cold beverages and feeling defeated, I loaded up my Zep drum and lid, and took the drum home.

    Prior to all this work, I had only tested my Weber kettle lid on an OPEN drum. It didn't fit, which lead me to making that homemade lid.

    I then thought to just try the kettle lid on the Zep drum I had just brought fit. (trying to show you my level of intelligence here) God forbid I tested the Kettle lid on the actual drum I had started working on [​IMG].

    I quickly hid all evidence of the previous monstrosity of a lid, and picked up a $40 Uniflame kettle from Walmart. Tried the lid, and it was close, but not as close as the Weber. I flattened the lip around the lid, and as you'll see below, I tapped it back down to fit the drum. Anyhow, it's finished with a sealing lid, and running fine. I posted my first smoke on it in the beef section. Here's the build pics:

    My dad found a metal frame which was once used as a GOTT water jugg holder on an irrigators truck. He also got me some expanded metal, and we wrapped it around the frame and welded (overkill, I know)

    Welded four pieces of strap to the bottom as legs, and used a row marker (looks like a smaller disc blade) to the bottom of that as the ash pan

    Finished pic of basket, holds A LOT of charcoal/lump

    Instead of 3 or 4 3/4" inputs at the bottom of the barrel, I went with two 1" inputs. One to be ball valved, and one to be capped off

    Hardware (stainless steel 1/4x2 bolts) and handles installed

    While seasoning, here's the Kettle Lid Modification

    Needs a paint job, and some wheels, but here it is chuggin along
  2. pit 4 brains

    pit 4 brains Master of the Pit Group Lead OTBS Member SMF Premier Member

    You definately went all-out on the Ugly part of UDS. Nice build. I'm headdin to walmart to get me one of those cheap azz grills. i want a domed lid so I can ad a second rack... good job again[​IMG]
  3. thunderdome

    thunderdome Master of the Pit

    The grill it comes with it pretty light..but works nonetheless
  4. bigslick

    bigslick Smoke Blower

    Great job, these threads are really getting me wanting to start a UDS build soon!
  5. rbranstner

    rbranstner Smoking Guru OTBS Member

    Looks good I can't wait to try mine out this weekend.
  6. beer-b-q

    beer-b-q Smoking Guru OTBS Member

    Nice Work, it looks great....[​IMG]
  7. waysideranch

    waysideranch Master of the Pit OTBS Member SMF Premier Member

    Nice build!!!!!!!!!!!!!!!
  8. I second that[​IMG]
  9. thunderdome

    thunderdome Master of the Pit

    If I only knew then, what I know now...

    But I guess that's the point of a first UDS build
  10. I really need to build one of these. Nice job.
  11. pit 4 brains

    pit 4 brains Master of the Pit Group Lead OTBS Member SMF Premier Member

    So i went with your idea for the cheap lid and had to take it a bit further...
    I used the hinges from the grill and got them to work on the UDS with a few homemade spacers made from 1/4 copper tubing..

    I mixed up the hardware and used the 4 longer bolts for the lid hinge halves..

    I added som more bolts for the upper grate, istalled the handle and the damper and walla!.. a bi-level UDS...
  12. chefrob

    chefrob Master of the Pit OTBS Member

    ^^^nice job!!
  13. meateater

    meateater Smoking Guru SMF Premier Member

    Nice job all!
  14. mballi3011

    mballi3011 Smoking Guru OTBS Member SMF Premier Member

    The builds are always the best when their done. Yours looks great and ready for some real smokin.
  15. mulepackin

    mulepackin Master of the Pit OTBS Member SMF Premier Member

    Looks real nice!
  16. thunderdome

    thunderdome Master of the Pit

    I finally sanded/and painted my UDS. All that's left is mounting my temp gauge.

    The recent storm we had put a layer of rust on the outside that gave it a nice AGCO orange look. It took 2+ hours to get it off

    Here it is after 2 coats of Hi Temp rustoleum. Right now at Lowes they have 15 ounce cans for the same price as 12 ounce cans (25% more special)
  17. meateater

    meateater Smoking Guru SMF Premier Member

    Coming along great, now all we need is a qview.[​IMG]
  18. wutang

    wutang Smoking Fanatic OTBS Member

    Looks good with the paint job. [​IMG]
  19. thunderdome

    thunderdome Master of the Pit

    Thanks, We got a hell of a storm, so I didn't have an excuse not to paint it after the rust took over the outside. I should have taken a picture of it before grinding.
  20. indiomechudo

    indiomechudo Newbie

    what is the valve at the bottom for? is it to control the air going into the fire?

Share This Page