Kinda cool to see this older thread come back - especially since I must have missed it first time around...
I reckon I have 2 hobbies I've always been pretty passionate about: Golf and welding/metalworking. Since I'm getting too old and arthritic to enjoy golf as much as I used to, I spend much more time on the welding and metalworking.
Here are a few projects I've built in the last 2 or 3 years:
Address number sign
Patio table and 2 footrests.
Curio table
And a few less decorative and more functional projects:
Welding cart.
Welding table/work bench
Angle grinder storage rack
I didn't build this utility trailer from the ground up...but I did build a new deck, rails, taillight brackets, and cargo hooks for it.
And my latest project - a reverse flow smoker. If you're interested, there's an entire build thread to that project here:
Howdy SMF Brothers and Sisters! I started a RF patio smoker build several months ago...and kept meaning to start a build thread here. So I'm finally getting around to doing that! I started with this propane tank. It's 5/16" thick, and 24" diameter by almost 11 feet long. I plasma-cut the...
www.smokingmeatforums.com
I'd say the smoker project is approximately 95% complete
Not sure it's a hobby, but I'd include my grandkids as an important pastime.
Red