Steel doors, vents, etc. for block smoker

[bpoppp]

Is there a source for commercially made steel doors for say a firebox or steel grating, piping? I'm in the planning stages of a combination masonry BBQ, brick oven, and large smoker all in one "side by side by side" unit. The plans and build are no issue, but the hardware is. Thanks Bill in Florida

 

[pops6927]

https://www.jamisondoor.com/PUBLIC/ADS/SMOKEHOUSE_ADS110.pdf

smhsdrs.jpg

• pops6927
• Oct 23, 2012

Some links for Smoke House Doors; however, you may find either building them yourself if you know metalworking or hiring it done may still be cheaper.

 

[shoneyboy]

https://www.jamisondoor.com/PUBLIC/ADS/SMOKEHOUSE_ADS110.pdf

smhsdrs.jpg

• pops6927
• Oct 23, 2012

Some links for Smoke House Doors; however, you may find either building them yourself if you know metalworking or hiring it done may still be cheaper.

That is one fine door......Depending on the temperature you want to run...... I do believe that you could a 36/72 steel door and just put a seal around the jam.....I have bought damaged steel doors from a door company's over the years....I think the last one I bought was about $150.00 for a steel door and the jam....

 

[bpoppp]

Thanks so much. I'm in the planning stage but will post pics when const. begins. -Bill