• Some of the links on this forum allow SMF, at no cost to you, to earn a small commission when you click through and make a purchase. Let me know if you have any questions about this.

Smoke Hollow wont stay lit.

bakerman

Fire Starter
46
10
Joined Nov 19, 2011
Hello All,

I’ve been experiencing some trouble keeping my 30 Smoke Hollow smoke lit. It lights up just fine, all the burner holes are clear of obstruction. I did the gas can reset, and still after a few minutes it goes out. I put up some wind screens ( thinking it was that problem ), same result.
So I’m thinking it is the regulator. Of course Smoke Hollow doesn’t have the exact regulator hose for my model. I have the Smoke Hollow 2 door LP smoker, any suggestions as to how to remedy this ?

Thanks in advance.

Bakerman
 

BandCollector

Master of the Pit
OTBS Member
★ Lifetime Premier ★
1,582
279
Joined Feb 4, 2009
Sometimes the mechanism in the regulator that controls the flow of gas sticks. Rap the regulator with the handle of a screwdriver and sometimes that may temporally solve the problem. Crude, but effective. It does sound however that you need to replace the regulator and hose.

Ask Smoke Hollow Customer Service which regulator will work with your model and try to find it on line. The internet is a wonderful thing!

I hope this helps,

John BandCollector BandCollector
 
Last edited:

bakerman

Fire Starter
46
10
Joined Nov 19, 2011
Hey John,
Thanks for the idea. I will give it a try once I am home.

Bakerman
 

Latest posts

Hot Threads

Top Bottom
  AdBlock Detected

We noticed that you're using an ad-blocker, which could block some critical website features. For the best possible site experience please take a moment to disable your AdBlocker.