ben cartwright2
Smoke Blower
Well that was weird, tried to add photos from photobucket, always worked at other sites lets try another way
Nice heard of Smokers!
Well that was weird, tried to add photos from photobucket, always worked at other sites lets try another way
Here is my mini - I think most WSM users and mini owners are over at www.virtualweberbullet.com just a thought
http://s922.photobucket.com/user/n1usd/media/BBQ/14%20WSM/PA250062_zpsacdf9fe1.jpg.html][/URL]
http://s922.photobucket.com/user/n1usd/media/BBQ/WSM%20Mini/P9020003_zps2b5c5659.jpg.html][/URL]
http://s922.photobucket.com/user/n1usd/media/BBQ/WSM%20Mini/P9020002_zpsf6f9b349.jpg.html][/URL]
http://s922.photobucket.com/user/n1usd/media/BBQ/WSM%20Mini/P9010071_zps06bcc243.jpg.html][/URL]
YepperHello, hope this is ok to post here, if not tell me where to go. Ok, where to go on the forum. Are these minis a modified smokey joe ? Just wondering cause they look like a neat little smoker. Thanks, WHB
Yep either a smokey joe gold or silver, with a 32qt tamale pot for the smoke chamber. There are aeveral build threads in this forum.Hello, hope this is ok to post here, if not tell me where to go. Ok, where to go on the forum. Are these minis a modified smokey joe ? Just wondering cause they look like a neat little smoker. Thanks, WHB
Well that was weird, tried to add photos from photobucket, always worked at other sites lets try another way
Ben,
What on earth are you lifting the top grate with in your Mini Smokey Mt. Smoker...A crane?
Pretty big Eye Bolts don't you think...LOL
Nice group of smokers. If a guy has that many smokers he must know what he is doing...Welcome to the sight.
John
The big eye bolts are so they are easy to grab with heavy gloves, when it is 10 degrees out I like gloves, besides the fact that I had them laying around
Thats one pretty mini. Dont keep it that way long.
Finally Done!
Born on January 6, 2014. Seasoned January 18, 2014
Thanks BD Skelly (Brian) for all your guidance!
What I did for the cow & pig cut-outs was use a stencil and some painters tape. I laid out slightly overlapping strips of painters tape onto a piece of cardboard, then used a stencil and an exacto knife to cut the block of tape to shape. Because the painters tape doesn't stick that well to the cardboard, I was able to get the cutout off the cardboard in one piece and transfer it to the pot before painting.Hey,
Nice mini looks a good build...I'm in the process of doing mine and have noticed a lot of people with great logos or teams they may support....just wondered how you are going about doing them??
Bet you can't wait to get that smoking!!