My Reverse flow build

[Silverbullet]

This smoker seen below was my 2nd one I built. My first build was a quick one, a two stainless beer keg offset. This 2nd build took me a lot longer because I wanted it looking nice. I only have 4 cooks under my belt, 2 on this one below and 2 on my beer keg smoker.

I took two 60g propane tanks and cut the ends off them so i could weld them together. It gave me a 5 foot long, 24" diameter cooking chamber. The fire box is 24"×24" in size. I used our old wood stove we had in one of our homes over 40 years ago. So this cooker has some sentimental value to me.

Please check out some pictures

 

[Silverbullet]

Edit* I have more progress of it since these pictures such as the rest of the rivets installed around the doors, gaskets and hold down door latches. Added an axe to my wood box for fun. I cut the blade out to look Viking style.

 

[seenred]

Hello Silverbullet! Looks like you just joined, and this was your first post?? Man, nice introduction! That build is a beauty...Very nicely done! I hope she holds a temp and cooks as well as she looks!

Welcome to the forums!

Red

 

[Silverbullet]

Hello Silverbullet! Looks like you just joined, and this was your first post?? Man, nice introduction! That build is a beauty...Very nicely done! I hope she holds a temp and cooks as well as she looks!

Welcome to the forums!

Red

Thank you!

 

[hardcookin]

Nice build...Thanks for sharing!