MB 30 Not Getting up to temps

[lunchboxfl]

I got a hand me down MB 30 smoker from my brother years ago. This past weekend when I used it, it would only get to about 225 according to my thermometer, but the MB thought it was well above 275 and would no get to the 265 that I was looking for. Any suggestions on what to do or a better smoker that I should look at getting? I want something good, but also do not want to break the bank and prefer something electric. Any help on this is greatly appreciated. Thanks again.

 

[Kevin DeShazo]

Could be the control head, I may be wrong also. If it is and you really like the MES replace the control unit with a PID and keep on trucking. Also a lot cheaper than a new smoker.

 

[lunchboxfl]

Do you have a PID suggestion and what is it...Haha?

 

[Kevin DeShazo]

PID takes place of the control unit on your MES and are more accurate and have better control than your MES controller. A lot of folks like the Auber pid. There seems to be a consistently good word on this one on here

Multi Purpose Controller [WS-1510ELPM] - $160.95 : Auber Instruments, Inc., Temperature control solutions for home and industry

Auber Instruments, Inc. Multi Purpose Controller [WS-1510ELPM] - The WS-1510ELPM is a versatile temperature controller to have in your home. It can be used for various applications such as Sous Vide cooking, controlling an electric smoker, making yogurt, dough proofing, controlling the...

www.auberins.com

 

[lunchboxfl]

Thank you for the info.

 

[Kevin DeShazo]

Welcome, hope it helps ya out.

 

[smokerjim]

you can check your connections behind back panel and see if they're good, sometimes they rust and break.

 

[BrianGSDTexoma]

If there was just a way to get the control temp probe where you want it in these MES think they would control better. Air flow seems to make a big difference. If I run with nothing in it runs about right. After adding things temp changes some times a lot but if you put a probe right next to the control probe it reads about same. Think they need a convection fan.