Future Smokehouse Build

[BGKYSmoker]

This is not my pic, found online.

Going to go with this type but with not as many bolts in the door support. From the looks of the bolts they are not SS. My hanger supports will have 2" holes drilled and they will be ripped so I have the same on both sides. My vents will be 3d printed, fresh air intake on the bottom and a 4" stove pipe with damper and cap for the outflow.

For the wood hope I have enough pallets, if not going with tongue & groove.

 

[bmudd14474]

Can't wait to see what you make.

 

[HalfSmoked]

Let's go let us see the smoke rolling.
Need some pallets they are free behind a lot of stores.

Warren

 

[JLeonard]

Fella was serious about that door! Look forward to seeing your build.

Jim

 

[SmokinEdge]

Looks great Rick. That’s a nice model. I’m guessing you will go electric for heat?

 

[Fueling Around]

watching

 

[Winterrider]

Got the popcorn ready !

 

[Cajun Smokes]

This is not my pic, found online.

Going to go with this type but with not as many bolts in the door support. From the looks of the bolts they are not SS. My hanger supports will have 2" holes drilled and they will be ripped so I have the same on both sides. My vents will be 3d printed, fresh air intake on the bottom and a 4" stove pipe with damper and cap for the outflow.

For the wood hope I have enough pallets, if not going with tongue & groove.

View attachment 682584

View attachment 682583

I wonder what the reason was for excessive bolts in the door. I do like the size of the smoker.