First brisket with OFB

  • Some of the links on this forum allow SMF, at no cost to you, to earn a small commission when you click through and make a purchase. Let me know if you have any questions about this.
SMF is reader-supported. When you buy through links on our site, we may earn an affiliate commission.

froman524

Fire Starter
Original poster
Sep 6, 2016
32
23
It's a beautiful morning to start a brisket, about 45° out here in Baltimore
Using Black Diamond Charwood I found at Ace Hardware for the first time.
Woke up at 5, seasoned a 5.8 lb flat, got the fire going (took 2.5 chimneys to get up to 225), in the Char-Griller at 6. Threw a few handful of dry Char-Broil whiskey wood chips (whatever they are) on the fire for some smoke.
ba9b082493ba6fc091cbbc2956b82b3a.jpg

e72f0b9f55b44b4627c7cfe5af47c9bb.jpg

Started a fire in the fire pit with oak to add to the firebox as necessary
IT at 110° at 7am
Will update throughout the day. Shooting to serve around 3pm
 
Just before 9 a.m.- started a chimney
IT 170°
grill temp 175
Foiled
7dc92285a50c06fe42acd13c70a651fe.jpg
 
It's 10a.m.and my IT is 203° already despite the fact that my temp gauges say the grill temp is 190 on one side and 200 on the other, although they were closer to 225 for a while.

I feel like this is way too fast.

Should I take it out of the foil?

Should I take it off?
 
10:10- toothpick test good in some spots, not add good in others. out of foil, back in smoker to hopefully get some better bark
d2c40e74ee4cc9c9d8b3425be2737bfc.jpg
 
If your pit temp is reading 190 & 200 it would be impossible for the meat to be at 203. Also the fact that your brisket is cooking so fast indicates that your pit temp is higher than your therms are reading. If I had to guess I'd say your pit therms are not accurate. Have you tested them or used an independent therm that has been tested on the cookeing grate to verify the pit temps?
 
Yeah, first time with these new pit therms. After I took the meat off, I put the remote therm back in (through a small piece of wood with a hole so it doesn't touch the grate). It's reading about 25° higher than the pit terms. But that means the pit temp during most of the smoke was actually between 200 and 250, which is right where I wanted to be. Still seems fast.
af6f598be0e4b942efa6254122b2dd6f.jpg
 
Turned out pretty good. Pull apart tender in some spots, a little less so in others. Decent moisture, probably would have been more so if I left it in the foil, but I did get a nice bark.
9bff3e6c11e06cbe7dff556b0a3fee82.jpg
 
Nice looking cow there for the first go. Id eat it. Great job. Thumbs Up
 
SmokingMeatForums.com is reader supported and as an Amazon Associate, we may earn commissions from qualifying purchases.

Latest posts

Hot Threads

Clicky