Cure#1 & jerky ?

  • Some of the links on this forum allow SMF, at no cost to you, to earn a small commission when you click through and make a purchase. Let me know if you have any questions about this.
SmokingMeatForums.com is reader supported and as an Amazon Associate, we may earn commissions from qualifying purchases.

buckinducks

Smoke Blower
Original poster
May 4, 2014
103
14
Canada
I recently bought a food scale and want to test it out.
Doing 3 pounds jerky, whole muscle meat.

Diggindog calculator says for 3#
3.4 grams cure #1
24.03 grams salt
13.61 grams sugar

Would like to cancel the salt as don't want it to be salty , and plan on putting soy in the brine.

Is overnight a long enough time to be cured ? If not can it be in the brine too long ? Say Thursday evening to Saturday ?
Basically going to mix up the recipe on the spot for all other flavorings, however does the above calculations sound like it will work ?
 
If your meat is in 1/4" thick strips or less than yes overnight is long enough to cure. Thursday to Saturday is fine, depending on the seasonings it might come out stronger flavor wise.

I use a pretty simple recipe (with cure #1) then I add dry seasonings after the cure if I want to change the flavor profile. I use Digging Dogs Calculator for the cure, but not for the salt or sugar when doing jerky.

http://www.smokingmeatforums.com/t/233270/thai-jerky
 
If your meat is in 1/4" thick strips or less than yes overnight is long enough to cure. Thursday to Saturday is fine, depending on the seasonings it might come out stronger flavor wise.

I use a pretty simple recipe (with cure #1) then I add dry seasonings after the cure if I want to change the flavor profile. I use Digging Dogs Calculator for the cure, but not for the salt or sugar when doing jerky.

http://www.smokingmeatforums.com/t/233270/thai-jerky
Thanks just the info needed , thanks!
 
SmokingMeatForums.com is reader supported and as an Amazon Associate, we may earn commissions from qualifying purchases.
Great deal on LEM Grinders!

Hot Threads

Clicky