• Some of the links on this forum allow SMF, at no cost to you, to earn a small commission when you click through and make a purchase. Let me know if you have any questions about this.

american slicing machine

jaxson

Newbie
2
1
Joined Nov 29, 2020
Hello all, first post so I hope I'm in the right place.

I picked up this slicer the other day, everything seems to be there and I have already started the disassembly process to clean and restore. Searching the internet trying to find info but there is not much. Most searches brought me to this site with some old posts. The blade is in decent shape but think I may want to replace it. The sharping stones look shot, I think I can replace those with a universal set. But the blade I can not find one but of info on that. Every other slicer blade but not one that will fit this slicer, LOL

Hoping someone here can point me in the right direction.

Thanks, jax
IMG_1438.JPG
IMG_1439.JPG
IMG_1440.JPG
IMG_1441.JPG
 

SmokinAl

SMF Hall of Fame Pitmaster
Staff member
Moderator
OTBS Member
★ Lifetime Premier ★
46,745
7,587
Joined Jun 22, 2009
Hope you find the parts!
It looks like a great slicer!
Al
 

Brokenhandle

Master of the Pit
★ Lifetime Premier ★
2,894
1,885
Joined Nov 9, 2019
Not much help with parts info here either, but looks like a heck of a machine! Hopefully someone can help ya out. And welcome from Iowa!

Ryan
 

jaxson

Newbie
2
1
Joined Nov 29, 2020
Thanks guys, Tinkered a little more today and got the blade off. the edge is rusty so hoping with some new stones will clean it up. I didn't take measurements but the center hole is about 3/4 and the two other holes are about 5/16. Its an 8" blade. So if this looks like something you seen let me know.
IMG_1446.JPG
IMG_1447.JPG
 

Latest posts

Hot Threads

Top Bottom
  AdBlock Detected

We noticed that you're using an ad-blocker, which could block some critical website features. For the best possible site experience please take a moment to disable your AdBlocker.