3D Printer

[pineywoods]

Which printer do you like better or do they both have their own individual jobs?

 

[sawdustrules]

Got a new file to print.

4-piece sausage stuffing horn pusher. To clear a set of sausage horns after stuffing into casings. The end caps measure just under the diameter of the set of horns that I own - 10mm, 13.5mm, 17.5mm, 21.5mm.

View attachment 656443

That is a beautiful piece of functional art! Well done!
I have been using a wooden dowel to clean out the stuffer horns, but I like this idea! Where you able to find the file or draw it up yourself?

 

[indaswamp]

Got a new file to print.

4-piece sausage stuffing horn pusher. To clear a set of sausage horns after stuffing into casings. The end caps measure just under the diameter of the set of horns that I own - 10mm, 13.5mm, 17.5mm, 21.5mm.

View attachment 656443

Now that is really cool!

 

[clarego]

how did I get here... nice work Rick

 

[BGKYSmoker]

how did I get here... nice work Rick

Aint that a song?

 

[BGKYSmoker]

Which printer do you like better or do they both have their own individual jobs?

Right now the sv05 is printing better, I just not messed with the 06 much.

 

[BGKYSmoker]

Thanks

I'm just having a hard time printing the rod, I need some supports for it to print good.

 

[chopsaw]

I need some supports for it to print good.

Like a wooden trough ? Little more info I could run you something out of wood .

 

[H. E. Pennpacker]

Thanks

I'm just having a hard time printing the rod, I need some supports for it to print good.

Did you design this yourself? If you did you could put a flat on the top of the handle and print it standing up. If you didn't design it you could possibly use the cut function in your slicer to accomplish the same thing and put a flat on the top of the handle and print it vertically.

This would eliminate the need for supports all together provided I am seeing it correctly and the tips come off of the end of the rod.

 

[BGKYSmoker]

Its not my created stl file.

 

[H. E. Pennpacker]

Its not my created str file.

I just seen the file and that the handle is printed separately from the rod. Printing cylinders that tall is always a problem for me as well. My best success has been to print them horizontal with support from bed plate only. But then the issue is they are never truly round at that point.

 

[Fueling Around]

Wouldn't be easier and less expensive to purchase a rod?

 

[SherryT]

Wouldn't be easier and less expensive to purchase a rod?

Where's the fun in that?

 

[BGKYSmoker]

Making 70mm riser feet for my laser.

 

[gmc2003]

Looks like your making your own Legos

Chris

 

[BGKYSmoker]

Looks like your making your own Legos

Chris

Kinda sorta.

 

[jkc64]

My souvenir from a plant trip a month or so ago. Only takes a couple of engineers, a 250,000 dollar 3D printer and a week or so of time. Five balls total all inside of each other.

 

[pineywoods]

Rick you know you have me starting to want one of these printers and when I buy one I'm gonna tell Karen it's all your fault

 

[BGKYSmoker]

Rick you know you have me starting to want one of these printers and when I buy one I'm gonna tell Karen it's all your fault

Right

 

[BGKYSmoker]

My souvenir from a plant trip a month or so ago. Only takes a couple of engineers, a 250,000 dollar 3D printer and a week or so of time. Five balls total all inside of each other.

View attachment 656767

I see files for things like this but I have not yet printed any.