Vacuum sealing to marinate

  • Some of the links on this forum allow SMF, at no cost to you, to earn a small commission when you click through and make a purchase. Let me know if you have any questions about this.
SMF is reader-supported. When you buy through links on our site, we may earn an affiliate commission.

dwags55

Newbie
Original poster
Dec 29, 2010
20
10
Hello all do any of you use a vacuum sealer for a marinating process to help draw the flavors into the meat Thanks David in Slidell, Louisiana
 
I do it in a canister when I'm making whole muscle jerky.  Works great if you don't want to wait overnight between slicing and dehydrating! 
 
Last edited:
I put this in the handy dandy search tool here and........ look!!!

http://www.smokingmeatforums.com/search.php?search=vacuum+sealer+for+a+marinating  

Have a great day!!

  Craig
Craig you are turning into one of my hero's here. I have been trying to get folks to use the search engine for a long time and it just seems to escape their thought process. Thanks for the help
Thank you!!  Did you see the one with the same question 2 days ago...funny.

  Craig
 
Last edited:
I put the meat in a ziplock bag first with the marinade put it in seal first in a vacuum bag them seal it. That way the juices don't wreck your sealer.
 
Thanks Bear.

That's not much bigger than the one I have and the foodsaver needle won't work in it.

I don't know why foodsaver won't come out with a large one big enough for a turkey.

I'm sure they would sell a bunch of them.

The vacuum marinade seems like it's the way to go.

It really infuses the marinade in the meat quickly.
 
I put the meat in a ziplock bag first with the marinade put it in seal first in a vacuum bag them seal it. That way the juices don't wreck your sealer.
Meateater, evening. I've had my foodsaver for 26 years. Had to replace a switch with an aftermarket but it still works.

There have been times when the vacuum pump will not "suck" correctly. I cleaned it by "sucking" water thru the hole where the bag is attached.

The pump is a piston pump, in mine, and the valves are a flexible membrane type flapper valves that are prone to debris causing them not to work properly.

Now when I seal something that has liquid in it I suck about a tablespoon of hot tap water thru the hole in the "vacuum" nozzle and flush it out.

The pump discharges inside the housing and there are drain holes in the sealer body that allows the liquid to run out. The only precautions one must take doing this are

do not run too much water too fast into the vacuum orifice, it will hydraulic the pump and it will stop. Second, place the unit on a tray to catch the liquid discharge.

If you think this will damage the machine, I have been cleaning the pump using that technique for about 22 years.

A machine that does not "suck" is a machine that "sucks" and needs to be replaced anyway you look at it.
 
Meateater, evening. I've had my foodsaver for 26 years. Had to replace a switch with an aftermarket but it still works.

There have been times when the vacuum pump will not "suck" correctly. I cleaned it by "sucking" water thru the hole where the bag is attached.

The pump is a piston pump, in mine, and the valves are a flexible membrane type flapper valves that are prone to debris causing them not to work properly.

Now when I seal something that has liquid in it I suck about a tablespoon of hot tap water thru the hole in the "vacuum" nozzle and flush it out.

The pump discharges inside the housing and there are drain holes in the sealer body that allows the liquid to run out. The only precautions one must take doing this are

do not run too much water too fast into the vacuum orifice, it will hydraulic the pump and it will stop. Second, place the unit on a tray to catch the liquid discharge.

If you think this will damage the machine, I have been cleaning the pump using that technique for about 22 years.

A machine that does not "suck" is a machine that "sucks" and needs to be replaced anyway you look at it.
Mine is a cheap seal-a-meal so I figure why take a chance. 
 
 
Last edited:
Yep, got a few Containers I use, I have even gone as far as adding frozen marinade to chicken in a bag sealing and freezing, then when it thaws in the fridge its in the marinade, I don't bother much anymore since I discovered the wonderful world of dry rubs.

I will on occasion marinate chicken strips in teriyaki or italian dressing.when doing pot stickers or something.
 
SmokingMeatForums.com is reader supported and as an Amazon Associate, we may earn commissions from qualifying purchases.

Latest posts

Hot Threads

Clicky