• Some of the links on this forum allow SMF, at no cost to you, to earn a small commission when you click through and make a purchase. Let me know if you have any questions about this.

The BBQ Gun Thread

SmokingMeatForums.com is reader supported and as an Amazon Associate, we may earn commissions from qualifying purchases.
What do you think about the 1873s chambered in .357/.38?
The reason I ask is I have thousands of 357/38 rounds and I'm not shooting those pistols much at all these days. It would be kinda cool to have a new toy in the safe.
I know it's not a historical round, but I'm not into that because of the prices on ammo, and not being able to mail order in this craphole of a State.
It's a great, fun shooter!
38/357 would be my first choice for the price of ammo and the reduced recoil. You would be much more apt to shoot it more than the 45 Colt offering because of those two factors. Your wife and daughters will love shooting 38 Spl in it too. If you get yourself three or four steel plates and hang them from Shepards hooks, you won't have thousands of rounds of ammo any more. 😄
 
It's a great, fun shooter!
38/357 would be my first choice for the price of ammo and the reduced recoil. You would be much more apt to shoot it more than the 45 Colt offering because of those two factors. Your wife and daughters will love shooting 38 Spl in it too. If you get yourself three or four steel plates and hang them from Shepards hooks, you won't have thousands of rounds of ammo any more. 😄
Yea that ting ting ting is one of the most addictive things there is in my book!!!
 
It's a great, fun shooter!
38/357 would be my first choice for the price of ammo and the reduced recoil. You would be much more apt to shoot it more than the 45 Colt offering because of those two factors. Your wife and daughters will love shooting 38 Spl in it too. If you get yourself three or four steel plates and hang them from Shepards hooks, you won't have thousands of rounds of ammo any more. 😄
Growing up out here we had plenty of places to hang steel, not so much these days.
Although, I do belong to a shooting club, that has silhouette shoots for members, along with the major rifle, pistol, and shotgun games, and it's only 5 minutes max from my house. I need to start looking at brands, How are the Henry rifles? I have the .22 but I haven't shot it much. I did have them send me the metal parts to replace the crappy plastic sight parts that it sell with. It's beyond me why they chinced on those two parts on the .22s, heck, charge $5.00 more for the guns, the parts are already in production, they did send them to me for free though.
 
Hmm... wouldn't know where to begin doing it myself, not to mention if special tools might be needed. I'll go look at the grips. Thanks!
I don't recall it being difficult at all, though it's been a bunch of years since I installed the Wolff reduced power springs in several of my revolvers. As for special tools, gunsmithing screwdrivers will help prevent marring the side plate screws, but you might be able to carefully remove them with regular screwdrivers.

I'll bet you can find Youtube videos that will walk you through spring changes in most any revolver you might own, so you can decide if it is something you want to do. It can really make a big difference in how the gun performs. If it leads to light strikes and inconsistent (or non-existent) ignition, you will have to change back to the full-power springs, but I've not encountered that with my guns.
 
That was part of the reason I went with my selection. While we can mail order here in Indiana, I already have a ton of .45 ACP ammo so I'll keep the ACP cylinder in the pistol and store the LC cylinder.
 
I don't recall it being difficult at all, though it's been a bunch of years since I installed the Wolff reduced power springs in several of my revolvers. As for special tools, gunsmithing screwdrivers will help prevent marring the side plate screws, but you might be able to carefully remove them with regular screwdrivers.

I'll bet you can find Youtube videos that will walk you through spring changes in most any revolver you might own, so you can decide if it is something you want to do. It can really make a big difference in how the gun performs. If it leads to light strikes and inconsistent (or non-existent) ignition, you will have to change back to the full-power springs, but I've not encountered that with my guns.
I did find a very good youtube for the Wolff spring change out. The guy is kind of a goof but the video shows everything that's necessary including a troubleshooting tip for the placement of the smaller spring in the trigger assembly.

 
SmokingMeatForums.com is reader supported and as an Amazon Associate, we may earn commissions from qualifying purchases.
SmokingMeatForums.com is reader supported and as an Amazon Associate, we may earn commissions from qualifying purchases.
Back
Top
Clicky