Some of the links on this forum allow SMF, at no cost to you, to earn a small commission when you click through and make a purchase. Let me know if you have any questions about this.
When I was smoking some jerky the other week I had a really hard time getting the chips to smoke. I ended up taking the rack that holds the wood chip pan and flipping it over to get it down on the flame. anyone else do anything different???
you might want to find a pan that you can put in there as a test and drill some holes on the side of the smoke box. or when doing low temp smokes like jerky i have to turn my flame down all the way and then even adjust the bottle itself down all the way to hold low temp 150 deg. before i installed temp controll system if i wanted to relight smoke box i would simply open up door about 3 inches and turn burner on full high leave set for about 10-15 min adjusting door accordingly to temps open more too hot and close a little if too cold. then turn burner down to low again and close the door this was the way that i did it before. hope this post was helpfull
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.