There was some shipping damage to my MES 340G and they had me cut the power cord so they can warranty it, anyone know how hard it would be to splice an extension cord directly into the junction box? Thanks
(edit) forgot that dr k gave me instructions when I had temp issues a few weeks back, any additional info would be useful
"You can get a 14 or 12 gauge extension cord and solder on a couple high heat connectors on the white and black wires. Strip the green ground wire and wrap around one of the element access plate screws to ground chassis. Plug this cord into an Auber PID. "
(edit) forgot that dr k gave me instructions when I had temp issues a few weeks back, any additional info would be useful
"You can get a 14 or 12 gauge extension cord and solder on a couple high heat connectors on the white and black wires. Strip the green ground wire and wrap around one of the element access plate screws to ground chassis. Plug this cord into an Auber PID. "
Last edited: