MES 30 Rack Size?

Discussion in 'Electric Smokers' started by tjohnson, Dec 6, 2014.

  1. tjohnson

    tjohnson Smoking Guru Staff Member Moderator Insider OTBS Member SMF Premier Member

    Little Help Here....
    I own (4) MES 40's but not a MES 30

    Can someone measure the racks on their MES 30 and post it?

    A customer wants QMATZ, and I'm not sure what size

    THX!

    Todd
     
  2. 14 5/8 W x 12 3/8 D
     
  3. c farmer

    c farmer Smoking Guru Staff Member Moderator OTBS Member SMF Premier Member

    14.5 x 12.5. Outside to outside
     
  4. daveomak

    daveomak Smoking Guru OTBS Member SMF Premier Member

    I cut my Matz.... 13.5" X 12" ... Fit inside the guide rails and from front to back.... Hope all MES 30's are the same size....
     
    Last edited: Dec 6, 2014
  5. daricksta

    daricksta Master of the Pit OTBS Member

    When I asked you what size QMATZ to order for my MES 30 you told me 12x18. Did you tell me the correct size because I've got three of them on the way. Will I have to cut them down to fit?
     
  6. tjohnson

    tjohnson Smoking Guru Staff Member Moderator Insider OTBS Member SMF Premier Member

    12x18 is for the MES 40 Racks

    Did I Oops?
     
  7. daricksta

    daricksta Master of the Pit OTBS Member

    I sure hope you didn't oops! Are they going to work in my MES 30? Please, Todd--tell me they will---for reals. Guys in this thread said they could be cut to fit. What are they made from?
     
  8. c farmer

    c farmer Smoking Guru Staff Member Moderator OTBS Member SMF Premier Member

    They will cut easy with sissors.
     
  9. daveomak

    daveomak Smoking Guru OTBS Member SMF Premier Member

    Save the pieces for drying stuff in your dehydrator.... I use it in mine... works great...
     
  10. tjohnson

    tjohnson Smoking Guru Staff Member Moderator Insider OTBS Member SMF Premier Member

    QMATZ are easily cut with an ordinary scissors
     
  11. daricksta

    daricksta Master of the Pit OTBS Member

    Thanks, guys. I think I remember how to use scissors. I'll measure the size of my racks just to confirm the dimensions before I start my trim.
     
  12. daricksta

    daricksta Master of the Pit OTBS Member

    Just so you know, Todd, The 18" wide QMATZ are the smaller of the two sizes you sell, making them appropriate for the MES 30. The 24" wide QMATZ would be the size for the MES 40 racks I would think. The size you sent me will be fine.
     
    Last edited: Dec 8, 2014

Share This Page