Measurements please...

  • Some of the links on this forum allow SMF, at no cost to you, to earn a small commission when you click through and make a purchase. Let me know if you have any questions about this.
SMF is reader-supported. When you buy through links on our site, we may earn an affiliate commission.


Smoking Guru
Original poster
OTBS Member
★ Lifetime Premier ★
Feb 3, 2013
DFW North Texas
Evening Gents.

Can you guys give me an idea on the measurements from the top of the pot to the grate support bolts?  I'll have 2 cooking grate levels in my pot.

And i'll be using the steamer plate that came with the pot as my defuser. 

Thanks so much and happy  happy happy holidays!

My top rack is right around 4" from the top of the pot. When I use a second rack it sits at the steamer tray level. I have a modified rack that will slip past the tamale steamer lip. I place my chunk of granite of there when doing double rack smokes.
I have 3 racks in mine with room for the 4th (which i made but never put the rivets in to hold it, I used 1/2" long pop rivets instead of bolts... cleaner look on the outside)... I set the bottom one on the indented lip at the bottom... and then just divided the others up evenly... what I did do that I don't like is... I put 4 rivets for each level... makes it harder to get grates in and out.... next time i will only use 3 per level.... I can load it up with a crapload of ABT's.... is reader supported and as an Amazon Associate, we may earn commissions from qualifying purchases.

Latest posts

Hot Threads