Let's Build A Smokehouse

  • Some of the links on this forum allow SMF, at no cost to you, to earn a small commission when you click through and make a purchase. Let me know if you have any questions about this.
SMF is reader-supported. When you buy through links on our site, we may earn an affiliate commission.


Nepas OTBS #242
Original poster
Staff member
OTBS Member
★ Lifetime Premier ★
Group Lead
Dec 25, 2010
Rineyville, KY
Put off long enough.

Lets build.

Building the base. 48x48

4X4 Runner is cedar treated. 0 contact with inside.

Way back when I first started to work for Northrop Aircraft, I was the saw man for the heavy crating dept. We made huge crates to ship T-38, Full fuselage's, F-5, F-20 and we did some work for skunkworks,,,SHHHHHH. Great 5 years. The following 20 years were ASD & B-2 with a few other sites here and there.

I have to cut the bottom for the base. I have 3/4" mahogany ply. After its all built I'm going to fire brick the top of the ply.

To be cont.
Going to be cold tomorrow so get back at it this weekend.
Looks like a great start. I’m in for this build. And 4x4, that’s going to be a helluva smoke chamber. How tall will the smoke chamber be?
SmokingMeatForums.com is reader supported and as an Amazon Associate, we may earn commissions from qualifying purchases.