qsbbq88
Newbie
Slightly new to the forum got a few questions about my UDS I just made and could use some advice.
-
Some of the links on this forum allow SMF, at no cost to you, to earn a small commission when you click through and make a purchase. Let me know if you have any questions about this.
From California
- Thread starter qsbbq88
- Start date
SmokingMeatForums.com is reader supported and as an Amazon Associate, we may earn commissions from qualifying purchases.
gearjammer
Master of the Pit
I can't help you with the UDS.
But I can tell you welcome and you came to
the right place to ask.
Keep on smokin' Ed
But I can tell you welcome and you came to
the right place to ask.
Keep on smokin' Ed
Welcome from SC. It's good to have you on this great site. I don't know anything about a UDS, but lots of flks have them so I'm sure you will get some help shortly. You may also want to visit the smoker site and look through there.
Good luck and good smokin', Joe.
Good luck and good smokin', Joe.
Welcome to SMF!
Post your UDS questions here for a quicker response.
http://www.smokingmeatforums.com/f/199/uds-builds
Good luck!
Al
Post your UDS questions here for a quicker response.
http://www.smokingmeatforums.com/f/199/uds-builds
Good luck!
Al
SmokingMeatForums.com is reader supported and as an Amazon Associate, we may earn commissions from qualifying purchases.
Similar threads
SmokingMeatForums.com is reader supported and as an Amazon Associate, we may earn commissions from qualifying purchases.
SmokingMeatForums.com is a community of barbecue and outdoor cooking enthusiasts dedicated to smoking meat.
© 2004-2026 SmokingMeatForums.com
