• Some of the links on this forum allow SMF, at no cost to you, to earn a small commission when you click through and make a purchase. Let me know if you have any questions about this.

Finishing touches on smokehouse

SmokingMeatForums.com is reader supported and as an Amazon Associate, we may earn commissions from qualifying purchases.

alblancher

Master of the Pit
OTBS Member
Joined
Mar 6, 2009
Messages
4,165
Reaction score
66
Location
Louisiana
The floor of the smokehouse is ¾ plywood. Should I put a layer of wonderboard on the floor? My firebox is 4 ft away from the smokehouse and I do not expect sparks but should I be mindful of protecting the area where the smoke tube enters the floor?

Thanks,

Al
 
Bassman,

I have some wonderboard left over from a shower I tried to build. Concrete impregneted fiberglass. Shouldn't burn and I should be able to remove it and hit it with the pressure washer if too much crud builds up.

You think I need to protect the floor for sanitary reasons or fire reasons?

Al
 
I would say both
unless you plan on putting a drip pan under items you are going to be
smoking. the wonderboard sounds like it would fit the bill.
better safe then sorry
 
SmokingMeatForums.com is reader supported and as an Amazon Associate, we may earn commissions from qualifying purchases.
SmokingMeatForums.com is reader supported and as an Amazon Associate, we may earn commissions from qualifying purchases.
Back
Top
Clicky