Finishing touches on smokehouse

  • Some of the links on this forum allow SMF, at no cost to you, to earn a small commission when you click through and make a purchase. Let me know if you have any questions about this.
SmokingMeatForums.com is reader supported and as an Amazon Associate, we may earn commissions from qualifying purchases.

alblancher

Master of the Pit
Original poster
OTBS Member
Mar 6, 2009
4,165
66
Louisiana
The floor of the smokehouse is ¾ plywood. Should I put a layer of wonderboard on the floor? My firebox is 4 ft away from the smokehouse and I do not expect sparks but should I be mindful of protecting the area where the smoke tube enters the floor?

Thanks,

Al
 
Bassman,

I have some wonderboard left over from a shower I tried to build. Concrete impregneted fiberglass. Shouldn't burn and I should be able to remove it and hit it with the pressure washer if too much crud builds up.

You think I need to protect the floor for sanitary reasons or fire reasons?

Al
 
I would say both
unless you plan on putting a drip pan under items you are going to be
smoking. the wonderboard sounds like it would fit the bill.
better safe then sorry
 
SmokingMeatForums.com is reader supported and as an Amazon Associate, we may earn commissions from qualifying purchases.

Latest posts

Clicky