Cutting boards.

[JckDanls 07]

With two layers of wood.

I was wondering why I didn't see the dark pieces on the back side...

 

[Steve H]

I was wondering why I didn't see the dark pieces on the back side...

Lol! I know. I don't believe I've seen a board like this before. The effect is really interesting.

 

[chopsaw]

A new thing seems to be " picture framed " boards . Double stacked face grain center sections with an edge grain frame around the outside to hide the seam and highlight the center .

Do the same with end grain center , and edge grain frame .

I'm not seeing what your calling out on the joints , but I'm gonna send you a setup I do for all my glue ups on a table saw . Works great , especially on shorter lengths .

 

[Steve H]

A new thing seems to be " picture framed " boards . Double stacked face grain center sections with an edge grain frame around the outside to hide the seam and highlight the center .

Do the same with end grain center , and edge grain frame .

I'm not seeing what your calling out on the joints , but I'm gonna send you a setup I do for all my glue ups on a table saw . Works great , especially on shorter lengths .

Ok, thanks! The fence on the jointer was slightly out of 90 degrees. Which caused a slight cup on my glue ups. Corrected most of it while planing. There is still a very slight cup. If you didn't have a straight edge on it. I doubt you'd notice it.

 

[Steve H]

A new thing seems to be " picture framed " boards . Double stacked face grain center sections with an edge grain frame around the outside to hide the seam and highlight the center .

That sounds interesting. Might give that a go as well.