Cold Smoke Generator, Variable

  • Some of the links on this forum allow SMF, at no cost to you, to earn a small commission when you click through and make a purchase. Let me know if you have any questions about this.
SMF is reader-supported. When you buy through links on our site, we may earn an affiliate commission.
dcarch, Looks like it would do the job on any size smoker or smoke house.  The only change I would make would be changing from a galvanized  to a stainless stove pipe.  Never liked the idea of cooking with anything galvanized. 

If you have any questions on using this type of smoke please ask.  The technique is different and slightly more complex from using a lighter smoke, but the results can be wonderful.

Tom
 
dcarch, Looks like it would do the job on any size smoker or smoke house.  The only change I would make would be changing from a galvanized  to a stainless stove pipe.  Never liked the idea of cooking with anything galvanized. 

If you have any questions on using this type of smoke please ask.  The technique is different and slightly more complex from using a lighter smoke, but the results can be wonderful.

Tom
Thank you Tom. Actually that was just a test set up to try out proper tube diameter, motor speed, vent hole size, top v.s bottom burn, pellets, wood chips, etc. 

I have since finalized the features and built with a 4" stainless steel tube.

dcarch
 
SmokingMeatForums.com is reader supported and as an Amazon Associate, we may earn commissions from qualifying purchases.

Latest posts

Hot Threads

Clicky