Better smoker than I expected (pic heavy)

  • Some of the links on this forum allow SMF, at no cost to you, to earn a small commission when you click through and make a purchase. Let me know if you have any questions about this.
SMF is reader-supported. When you buy through links on our site, we may earn an affiliate commission.

DEERMAKER

Meat Mopper
Original poster
★ Lifetime Premier ★
Jan 12, 2024
162
180
NORTHEASTERN PA
Finally finished my warmer to smoker build. The electric over propane works great for me. Included lots pics and first cook. This was a deer bologna that came out great. 80 ven / 20 fat
But I'll do a seperate post on the bologna.
Temps held so well it feels like I'm cheating. Wired up two dedicated 20 amps and I was in business. Smoke mailbox was awesome once I figured out airflow. Thanks to everyone on this forum for advice, it really was used and appreciated. Can't say it enough. Here are the pics:
 

Attachments

  • IMG_4288.jpeg
    IMG_4288.jpeg
    144.7 KB · Views: 42
  • IMG_4287.jpeg
    IMG_4287.jpeg
    139.4 KB · Views: 39
  • IMG_4290.jpeg
    IMG_4290.jpeg
    103.7 KB · Views: 33
  • IMG_4289.jpeg
    IMG_4289.jpeg
    141.5 KB · Views: 32
  • IMG_4292.jpeg
    IMG_4292.jpeg
    103.4 KB · Views: 34
  • IMG_4317.jpeg
    IMG_4317.jpeg
    177.5 KB · Views: 33
  • IMG_4319.jpeg
    IMG_4319.jpeg
    149.5 KB · Views: 31
  • IMG_4320.jpeg
    IMG_4320.jpeg
    154.1 KB · Views: 30
  • IMG_4332.jpeg
    IMG_4332.jpeg
    86 KB · Views: 30
  • IMG_4333.jpeg
    IMG_4333.jpeg
    91.6 KB · Views: 31
  • IMG_4356.jpeg
    IMG_4356.jpeg
    167.3 KB · Views: 31
  • IMG_4365.jpeg
    IMG_4365.jpeg
    79 KB · Views: 29
  • IMG_4366.jpeg
    IMG_4366.jpeg
    133.1 KB · Views: 27
  • IMG_4390.jpeg
    IMG_4390.jpeg
    120.9 KB · Views: 25
  • IMG_4391.jpeg
    IMG_4391.jpeg
    106.7 KB · Views: 23
  • IMG_4393.jpeg
    IMG_4393.jpeg
    104.9 KB · Views: 23
  • IMG_4401.jpeg
    IMG_4401.jpeg
    94.8 KB · Views: 23
  • IMG_4402.jpeg
    IMG_4402.jpeg
    115 KB · Views: 23
  • IMG_4406.jpeg
    IMG_4406.jpeg
    141.4 KB · Views: 25
  • IMG_4503.jpeg
    IMG_4503.jpeg
    171.3 KB · Views: 27
  • IMG_4505.jpeg
    IMG_4505.jpeg
    151.7 KB · Views: 29
  • IMG_4506.jpeg
    IMG_4506.jpeg
    151.7 KB · Views: 30
  • IMG_4512.jpeg
    IMG_4512.jpeg
    117.2 KB · Views: 29
  • IMG_4515.jpeg
    IMG_4515.jpeg
    116.5 KB · Views: 29
  • IMG_4516.jpeg
    IMG_4516.jpeg
    137.4 KB · Views: 28
  • IMG_4517.jpeg
    IMG_4517.jpeg
    123 KB · Views: 28
  • IMG_4518.jpeg
    IMG_4518.jpeg
    100.6 KB · Views: 32
  • IMG_4519.jpeg
    IMG_4519.jpeg
    162 KB · Views: 32
  • IMG_4521.jpeg
    IMG_4521.jpeg
    171.9 KB · Views: 30
  • IMG_4522.jpeg
    IMG_4522.jpeg
    103.8 KB · Views: 30
  • IMG_4523.jpeg
    IMG_4523.jpeg
    118.4 KB · Views: 28
  • IMG_4524.jpeg
    IMG_4524.jpeg
    94.5 KB · Views: 29
  • IMG_4525.jpeg
    IMG_4525.jpeg
    100.6 KB · Views: 30
  • IMG_4528.jpeg
    IMG_4528.jpeg
    111 KB · Views: 27
  • IMG_4527.jpeg
    IMG_4527.jpeg
    235 KB · Views: 26
  • IMG_4547.jpeg
    IMG_4547.jpeg
    64.7 KB · Views: 26
  • IMG_4549.jpeg
    IMG_4549.jpeg
    100.5 KB · Views: 29
  • IMG_4589.jpeg
    IMG_4589.jpeg
    207.5 KB · Views: 43
That came out clean! What kind of temp controller are you using for each element. A nice on the vari-speed control fan
 
That came out clean! What kind of temp controller are you using for each element. A nice on the vari-speed control fan
Ty!
Those were on amazon
Baytite brand , I have no issues at all with them
The only ones I found rated as high as I needed
I like inkbird products but the rating wasnt what I needed
 
  • Like
Reactions: civilsmoker
SmokingMeatForums.com is reader supported and as an Amazon Associate, we may earn commissions from qualifying purchases.
Clicky