Auber PID probe

[smokin pop-pop]

So I just got my Auber PID in the mail. my question is where to put the probe. I do a lot of smoking that requires hanging from dowels like snack sticks and bacon so I don't want to attach it to a wire rack because they probably won't be used. Any suggestions? TIA

 

[JckDanls 07]

Just let it hang down in between the snack sticks.. making sure it doesn't touch any of them ...

 

[smokin pop-pop]

Just let it hang down in between the snack sticks.. making sure it doesn't touch any of them ...

i was hoping to mount it a little more secure like maybe on the back wall but i'm not sure if that's a good idea

 

[chopsaw]

i was hoping to mount it a little more secure like maybe on the back wall but i'm not sure if that's a good idea

I have mine mounted through the back wall . When I get on my laptop I'll post a picture.

 

[chopsaw]

Here's a thread from when I did mine . Shows how I mounted the probe . I have a gen 1 mes 30 . I re-used the mounting hardware that was used for the stock ( useless ) meat probe . Don't know what model you have , but if it has the meat probe and a rear controller it should have the grommet and the brackets .

Auber controller added to my MES 30

Well after 5 years of almost constant use , the on / off button was getting worn out . Talked to Tallbm and went with the WS-1510 elmp he recommended . Brought the 30 into the workshop so I could get at it . The re-wire is really simple , but @tallbm did all the leg work on that . I wanted to...

www.smokingmeatforums.com

 

[poacherjoe]

Mount it on the back wall 2/3 from the bottom or higher

 

[chopsaw]

Also , I use mine most of the time for sausage and hams . The location works great for that . If you get it to high your temps will be to low in the rest of the smoker .