• Some of the links on this forum allow SMF, at no cost to you, to earn a small commission when you click through and make a purchase. Let me know if you have any questions about this.

Airflow

SmokingMeatForums.com is reader supported and as an Amazon Associate, we may earn commissions from qualifying purchases.

boxslugger

Newbie
Joined
Aug 6, 2015
Messages
13
Reaction score
10
Hey all. Noob here.
I made a flower pot smoker and its got almost zero airflow. Do I drill holes or no?
 
Hey all. Noob here.
I made a flower pot smoker and its got almost zero airflow. Do I drill holes or no?
Check out the minis,you need air to regulate your temps.

Good Luck

Richie
 
Controllable air flow is the key to any smoker, even a homemade one. If you can't regulate the intake of air then you will never be able to control the temps. 
 
I suppose I should have also stated that it's electric. Does that matter?
 
Yes you will need airflow to keep the chips burning. You won't need a ton of air but you will need some. 
 
Okay.
Thanks for the help.
Much appreciated.
Hmmf! Where's my drill...
 
×2 with maddox. Not much air needed. Maybe drill a few holes on aide about 1-2" ip from bottom and a few at top for smoke and you are good to go to run it all day with no issues.
 
SmokingMeatForums.com is reader supported and as an Amazon Associate, we may earn commissions from qualifying purchases.
SmokingMeatForums.com is reader supported and as an Amazon Associate, we may earn commissions from qualifying purchases.

Latest posts

Back
Top
Clicky