• Some of the links on this forum allow SMF, at no cost to you, to earn a small commission when you click through and make a purchase. Let me know if you have any questions about this.

Air dampers

SmokingMeatForums.com is reader supported and as an Amazon Associate, we may earn commissions from qualifying purchases.

ron eb

Meat Mopper
Joined
Mar 22, 2012
Messages
173
Reaction score
12
Location
Baltimore
Just came across 2 4 inch air dampers with 4 thre quarter inch holes. I want to put them on my brinkmann that has none. Any suggestions. ?
 
1 on top and 1 on the bottom? I would think it would give you more control and more air flow. The Weber kettle grills are set up that way and work great.
 
Do you think it matters if I goes in the middle or off to the side on the bottom. I was thinking of getting two more for the bottom to even the flow.
 
I would thinks as long as the bottom vent is below the charcoal pan it would supply enough air. (off to the side so you can reach it) And one on top. Give it a try and see if your going in the right direction. If it works your done. Or decide to add another vent or 2. Even if the extra vents are not what is needed you can keep them closed.
 
Yeah. I was thinking off center on the bottom along with 2 more to spread out the intake instead of just one in the middle.
 
SmokingMeatForums.com is reader supported and as an Amazon Associate, we may earn commissions from qualifying purchases.
SmokingMeatForums.com is reader supported and as an Amazon Associate, we may earn commissions from qualifying purchases.
Back
Top
Clicky