This is the same as I did on my 18" Kettle
16" Pizza pan fits almost perfect, 2 dollar store tin pans a few pop rivets does it. I use 2 pieces of foil to seal the edge gap
Here you can see the edge gap
On the table for a better pic
Loaded with char coal and I put a fire starter cube on the left side
The bottom sweeper vents are different on this premier then my other kettle
That will be something for me to play with.
Richie
1st smoke on it PP For Tacos
Had a chance to play with the sweeper, it worked and if I have to redo it it is simple
Cleaned the grill out used Awesome from the dollar store
Heat proof tape applied outside just covering the large hole
Did the same inside making sure tape stuck to tape
Did a test burn using some charcoal from Walmart emptied it out an checked the tape all is good
Richie
16" Pizza pan fits almost perfect, 2 dollar store tin pans a few pop rivets does it. I use 2 pieces of foil to seal the edge gap
Here you can see the edge gap
On the table for a better pic
Loaded with char coal and I put a fire starter cube on the left side
The bottom sweeper vents are different on this premier then my other kettle
That will be something for me to play with.
Richie
1st smoke on it PP For Tacos
Had a chance to play with the sweeper, it worked and if I have to redo it it is simple
Cleaned the grill out used Awesome from the dollar store
Heat proof tape applied outside just covering the large hole
Did the same inside making sure tape stuck to tape
Did a test burn using some charcoal from Walmart emptied it out an checked the tape all is good
Richie
Last edited: