Hi JohnnyK ..
You must be a bit frustrated ... Your previous 5 or so threads over the last 8 months have all related to this problem... In some you have a AMNS, in others it is an
AMNPS, And in this one you are back to an AMNS with pellets, very confusing for the form .... I realize that the 59 or so replys that your posts received were not all on point, and some threads were taken over , so this should help
Search in the search bar using only the following two words ...
AMNPS MES40. ... You should get lots of info
Check out
1. A-maze-n web site .. Look at the facts page .. Remember to mix your cherry pellets with a second type , and Todd suggests that you you use more of the second flavor and layer the cherry in the middle
2. Microwave ( or bake) your pellets for about 30 - 40 seconds just before you lite them
3. Get a good burn going before you blow out the flame and put the pellets in the MES
The search will advise you all of this .. Plus .. Ideas on chips to buy , venting, unit placement, etc
Hope it as simple as you using cherry pellets , or not microvaving (pellets can gather moisture) .. Todd showed you how to get a good start on the pellets ..
Took me a few tries to get it right and I just used a blowtorch ( mini )
Good luck .. Have fun reading .. :-)
Ross
Edit ... You posted while I typed this .. See you are not using cherry so that is not a problem :-). Also you cleared up the
AMNPS .. The search will really help you .. :-)