Today is the day...

  • Some of the links on this forum allow SMF, at no cost to you, to earn a small commission when you click through and make a purchase. Let me know if you have any questions about this.
SmokingMeatForums.com is reader supported and as an Amazon Associate, we may earn commissions from qualifying purchases.

Unique Name

Meat Mopper
Original poster
Jan 8, 2019
154
60
I'm gonna try a couple spatched chickens on the WSM.
Question...
If they both will fit, should I put them both on the top rack/bottom rack?
Or one on each?
Thank you for any and all replies, info, warnings, etc...
 
Top rack, if they both will fit. It's usually hotter then the bottom rack by 10* or 15*.

Chris
 
Top rack, if they both will fit. It's usually hotter then the bottom rack by 10* or 15*.

Chris
Ok...
So I squeezed them on the top.
Temp dropped HARD!
Was at 315ish, now stuck low 260s...
Hmmm...
2tvh52.jpg
 
Let it recover/stabilize, then start opening up the bottom vents until your about 10* from your desired temp. 325* plus is a good temp for poultry. You should get a good crispy skin at 325* - plus chicken takes on smoke rather quickly. Nothing tastes worse then over-smoked poultry - trust me on that.

Chris
 
SmokingMeatForums.com is reader supported and as an Amazon Associate, we may earn commissions from qualifying purchases.
Clicky