Suggested smoker box?

  • Some of the links on this forum allow SMF, at no cost to you, to earn a small commission when you click through and make a purchase. Let me know if you have any questions about this.
SmokingMeatForums.com is reader supported and as an Amazon Associate, we may earn commissions from qualifying purchases.

Hoshijiro

Newbie
Original poster
Jun 15, 2020
4
0
Hello

I have a Masterbuilt MPS230 smoker. I would like to get a smoker box for it, but I am unsure which one. Would anyone have a suggestion? This particular smoker can use propane or charcoal as fuel. Would the suggested smoker box work for both fuel types? Perhaps worth mentioning: I have only used a smoker once, and I chose propane as the fuel source. I covered the wood chip tray with three layers of heavy duty foil. The foil disintegrated. This is why I am looking for a smoker box.
 
I have seen a lot of suggestions about using a cast iron pan directly over the chip tray. Most people have been suggesting a 10 inch which can be found at walmart/target for about 15 bucks.

I've got a 12 inch myself that I intend to use (a little big, but it was free). All I need to do is saw off part of the handle
 
I have seen a lot of suggestions about using a cast iron pan directly over the chip tray. Most people have been suggesting a 10 inch which can be found at walmart/target for about 15 bucks.

I've got a 12 inch myself that I intend to use (a little big, but it was free). All I need to do is saw off part of the handle
This is great to know! Thanks for the advice.
 
SmokingMeatForums.com is reader supported and as an Amazon Associate, we may earn commissions from qualifying purchases.
Clicky