Sprouting Hard White For Flour

  • Some of the links on this forum allow SMF, at no cost to you, to earn a small commission when you click through and make a purchase. Let me know if you have any questions about this.
SmokingMeatForums.com is reader supported and as an Amazon Associate, we may earn commissions from qualifying purchases.

BGKYSmoker

Nepas OTBS #242
Original poster
Staff member
Moderator
OTBS Member
★ Lifetime Premier ★
Group Lead
Dec 25, 2010
15,050
14,497
Rineyville, KY
More and more folks at the farmers mkt are asking for fresh milled.

So

I'm sprouting some hard white that will dry in the dehydrator with fan only then into my wonder mill.

Took 2 days of soaking and rinsing 2x daily to get sprouts.
I did 4 cups of hard white. Next is 4 cups of red.

PXL_20250821_143115459.jpg


PXL_20250821_143120305.jpg


PXL_20250821_161003057.jpg


PXL_20250821_161923913.jpg
 
  • Like
Reactions: tallbm
I am curious what the reason is for sprouting the wheat kernels?

As a brewer, I know that sprouting, or malting of barley is done to develop the enzymes needed to convert starches to sugars in the mashing process that all-grain brewers use when making beer.

Does any of that apply to what you are doing?
 
Looks good
If you get good results I foresee a grain mill in my future

Side note weather has been terrible for wheat harvest with sprouting damage and poor “falling numbers”
 
Finally dried and milled today.

PXL_20250821_143120305.jpg


I use whiskey corks to put in the openings on my mill so no bugs get in.
PXL_20250823_192332397.jpg


PXL_20250823_193005422.jpg


Sourdough next week.
PXL_20250823_193215183.jpg
 
  • Like
Reactions: 02ebz06
SmokingMeatForums.com is reader supported and as an Amazon Associate, we may earn commissions from qualifying purchases.
Clicky