Smokehouse smoke diverter

  • Some of the links on this forum allow SMF, at no cost to you, to earn a small commission when you click through and make a purchase. Let me know if you have any questions about this.
SMF is reader-supported. When you buy through links on our site, we may earn an affiliate commission.

chucksmokesmeats

Newbie
Original poster
Sep 10, 2019
12
2
So I built a 3 x 3 x 5 cedar smokehouse with an external smokebox (think old wood stove)...what should I do to divert smoke in order to check on whatever is in the smokehouse so I don't die of asphyxiation every time I stick my head in?
 

Attachments

  • smokehouse.jpg
    smokehouse.jpg
    218.3 KB · Views: 61
I was thinking that too.. you think a T and add 2 dampers or just one going into the smokehouse?
 
This is what I did. Change the elbow to a tee and add a damper. Read the link as I had to customize that damper and heat and smoke will run right out that "bypass" instead of into the smokehouse when it is close. It is not as closed as you think it is.

Before
Bypass_4 (Medium).JPG


After
Bypass_8 (Medium).JPG
 
  • Like
Reactions: daveomak
SmokingMeatForums.com is reader supported and as an Amazon Associate, we may earn commissions from qualifying purchases.
Clicky