northshore pete
Newbie
- Jan 13, 2017
- 26
- 10
On my smoke hollow 38 I bought a needle valve but I can not get the hose off the regulater seems like the hose is pressed onto the regulater did anyone else have this problem and how did you fix it?
-
Some of the links on this forum allow SMF, at no cost to you, to earn a small commission when you click through and make a purchase. Let me know if you have any questions about this.
smoke hollow regulater
- Thread starter northshore pete
- Start date
SmokingMeatForums.com is reader supported and as an Amazon Associate, we may earn commissions from qualifying purchases.
genek
Smoke Blower
I have the 30" Smoke Hollow and my regulator looks to be the same as the one on the 38", at least in the pictures of them for sale at Home Depot etc.
Mine was just a 1/8" ip thread and screwed out, I use standard pipe fittings to insert the needle valve. a good picture of your regulator would help.
GeneK
Mine was just a 1/8" ip thread and screwed out, I use standard pipe fittings to insert the needle valve. a good picture of your regulator would help.
GeneK
SmokingMeatForums.com is reader supported and as an Amazon Associate, we may earn commissions from qualifying purchases.
Similar threads
SmokingMeatForums.com is reader supported and as an Amazon Associate, we may earn commissions from qualifying purchases.
SmokingMeatForums.com is a community of barbecue and outdoor cooking enthusiasts dedicated to smoking meat.
© 2004-2026 SmokingMeatForums.com
