Question about making hot links

  • Some of the links on this forum allow SMF, at no cost to you, to earn a small commission when you click through and make a purchase. Let me know if you have any questions about this.
SMF is reader-supported. When you buy through links on our site, we may earn an affiliate commission.

73saint

Master of the Pit
Original poster
OTBS Member
SMF Premier Member
Mar 8, 2017
2,016
2,265
Near New Orleans La
I am about to start making my own Texas style hot links. I’ve done a bunch of research, and about settled on my approach but I have one question as it relates to whole mustard seed. Should I keep it whole, or use my ninja to break it up/grind it somewhat?

I’m not familiar with using whole mustard seed, and I can’t visualize it being whole within the links. But if that’s standard practice, I’ll certainly do so.

Any thoughts?
 
I've seen it either way. Whole seeds will give you a burst of mustard flavor as you chew the sausage, where as mustard powder will spread the mustard flavor throughout the link. I've had it both ways, just depends on what you are looking for. In my personal recipe for cajun smoke sausage, I use dry mustard powder.
 
  • Like
Reactions: 73saint
Thanks Indaswamp that makes sense! Maybe I’ll start with a course grind on some whole ones and go from there.
 
I like it both ways . My opinion is whole makes it more like polish sausage ( which is how I like it and make it ) But the red hot type links I buy use powder .
 
  • Like
Reactions: 73saint
I like it both ways . My opinion is whole makes it more like polish sausage ( which is how I like it and make it ) But the red hot type links I buy use powder .
I just watched another video, and now I’m leaning towards your method..leaving them whole.

Thanks for the input, Chop!
 
I like to just smash them with a spoon---Not perfect--Just roughly & quick, just to get the oil flowing.
Same thing with Fennel Seed, if you use it.

Bear
 
  • Like
Reactions: 73saint and chopsaw
C8F5F4B6-340C-4A2D-BE68-7D6C1A798254.jpeg 81B6B5B5-B711-42B8-B690-18D4DA224C1E.jpeg
This is what my 5lb batch looks like. The fry test was great. Not as much heat as I was expecting (I went w willies hot links recipe) but still a nice heat level.

Can’t wait to fire up the grill and try em over some hot pecan coals.

Oh and by the way, I toasted the coriander and mustard seeds so I’m sure that will only enhance the flavor. And I used Stella Artois for the beer (it’s what was in the fridge).
 
FCDF3E28-2820-4B1B-901E-B1918C3700F1.jpeg 2654408A-5084-4D87-BF52-430A382E5ACA.jpeg 74CEAFC4-0CBA-400B-9648-1DFB09638060.jpeg
The hot links were great, perfect balance of heat and I got the fat just right. Maybe next time I may go a slightly finer grind but I’m not complaining. Also made a 5 lb batch of my normal, spicy Italian and had some leftover chuck roast that I ground for burgers. Busy day, but I have a lot of goodies now!

Thanks for all the input.
 
For most of the sausages we make, I like first grind through the kidney plate. Add salt dry, do protein extraction for primary bind, then add cure. Second grind through 1/4" (6mm) plate.

I went 3/8" (10mm) plate first grind when I made the pineapple sausage for more protein extraction (smaller pieces; more surface area contact with salt). Then thru 1/4" plate. It is a very homogenized meat paste. I can't imagine using a hamburger plate to make pork sausages....not necessary IMO.
 
SmokingMeatForums.com is reader supported and as an Amazon Associate, we may earn commissions from qualifying purchases.

Latest posts

Hot Threads

Clicky