Preparing for a reverse flow smoker build in Wisconsin.

Discussion in 'Roll Call' started by kenjoelm, Jul 31, 2016.

  1. kenjoelm

    kenjoelm Newbie

    Just picked up a 7ft long air compressor tank. This will be my first build so any advice would be welcome.
    Thanks in advance.
     
  2. smokinal

    smokinal Smoking Guru Staff Member Moderator OTBS Member ★ Lifetime Premier ★

    [​IMG]   to SMF!

    Glad to have you aboard!

    Al
     
  3. mike5051

    mike5051 Master of the Pit SMF Premier Member

    Welcome to the site.  Try the search tool and look for rf builds.  Lots of folks here with experience.  Glad you joined us.

    Mike
     
  4. What type of smoker are you looking to build?
     
  5. kenjoelm

    kenjoelm Newbie

    A reverse flow smoker possibly with a warming section.
     
  6. [​IMG]   Good morning and welcome to the forum, from another sunny and hot day here in East Texas, and the best site on the web. Lots of great people with tons of information on just about  everything.

    Gary
     
  7. I am sure if you need any questions answered this is the place to ask them. I just built a smoker out of a 500 gallon propane tank witch is about 10ft long. I didn't go reverse flow. I did more of a Franklin style. It works really well.
     

Share This Page