This is PS seasoning's Red Barn Bologna all mixed with 10 pounds of ground venison and 2 1/2 pounds of ground pork butt that I ran through the grinder twice using a 3/16 plate. I then placed it in a 2 gallon ziplock and put it in my enterprise stuffer with the corner of the bag pulled out at the nozzle. This way makes it easier for cleanup.
Here you can see the bag sticking out of the nozzle. Now I cut the bag and place the spout on the stuffer and start pressing the mixture into my collagen ring casing's
Here are the casings all stuffed. This is my first time using these rounded collagen casing's. They stuffed quite easy and didn't burst. I was impressed. I let these sit in the fridge overnight
Here the ring bologna is drying in the smoker for a few hours before I start the smoking process
This is my SmokinTex 1460 smoker with an Auber PID controller and an Inkbird remote thermometer. I am using the step method where I start with 120 degrees and no smoke for the first hour and then I add the Mountain Mahogany wood chunk and start the smoke process. The PID controller is pre programed to add 10 degrees every hour until it reaches 170 and then it will stay at 170 until the probe that is in the bologna reaches an IT of 153. Then it will sound an alarm
Here the ring bologna is done and ready to toss in my ice chest that is full of chopped ice and water to bring the temp down and stop the cooking process so it won't dry out. This takes about 20 minutes
Now that they have cooled down I place them on a wooden dowel and let them Blossom . It was nice and cool so I just left them in the garage overnight.
Here is the finished product sliced for you to see. Sorry you can't taste it . It turned out great .
