• Some of the links on this forum allow SMF, at no cost to you, to earn a small commission when you click through and make a purchase. Let me know if you have any questions about this.

New UDS on the block

SmokingMeatForums.com is reader supported and as an Amazon Associate, we may earn commissions from qualifying purchases.

smokewatcher

Meat Mopper
Joined
Aug 31, 2006
Messages
265
Reaction score
18
Location
Florence, Az
Just put the finishing touches on my drum smoker. The ash pan came from my GOSM and the charcoal basket stands above it about 2½". It can cruise about 12-16 hours on a single load of fuel. Whatcha think?
664f7465_vbattach15603.jpg

03516778_vbattach15602.jpg

3ca05e7f_vbattach15600.jpg

02075c70_vbattach15601.jpg
 
How is your temp, I made one of these, and
i could'nt get it under 350. Do you just have one air hole in the bottom where the ball valve is shown. I put 4 1" holes in the bottom of mine, and blocked 3 off, and still could'nt get my temp down. Maybe just too much air.
 
I put about 8lbs in the charcoal basket, and lit a chimney and dumped it on top.
 
That looks mighty nice! Can't wait to see the 'Q it produces!
PDT_Armataz_01_34.gif
 
Now that's kind of Cruise Control.
 
I'm still getting the hang of temperature control on this one. I have four ½" pipes, and even with 3 blocked it rides hot. I think I'm starting with too many hot coals.

My first smoke was before it was finished....just couldn't wait! It was chicken halves, beef loin roast and fatties.
 
SmokingMeatForums.com is reader supported and as an Amazon Associate, we may earn commissions from qualifying purchases.
SmokingMeatForums.com is reader supported and as an Amazon Associate, we may earn commissions from qualifying purchases.

Latest posts

Back
Top
Clicky